Friedrich FreshAire Packaged Terminal Air Conditioner With Heat 9,000 BTU 230V in White - PVH09K3FC

Friedrich PVH09K3FC FreshAire Packaged Terminal Air Conditioner With Heat 9,000 BTU 230V in White

The Friedrich FreshAire packaged terminal air conditioner is designed to bring dependable comfort to guest rooms and other hospitality environments. With Precision Inverter technology, this PTAC system adjusts output from 20% to 120% of capacity to match the room’s real-time needs, helping deliver consistent temperature control with smoother operation. The variable-speed compressor also supports quieter performance, making it a smart choice for spaces where a peaceful atmosphere matters.

Features

Make-Up Air System

• Dedicated 2-Speed Fan
  delivers up to 52 CFM of outside air into the room.
• Does Not Rely On Separate Refrigeration
  system like competitor’s units.
• Adaptive Control
  Pair with Friedrich’s VRPX thermostat and maximize your indoor comfort with FreshAire adaptive make-up air control for humidity and occupancy.

Durable Construction

• Aluminum Endplates
  reduce outdoor coil corrosion.
• Galvanized Sinc Coated Steel Wall Sleeve & Steel Base Pan
  Undergo an 11-step preparation process, are powder coated with a polyester finish and cured in an oven for exceptional durability.
• Factory Run-Tested Units
  Units reduce problems in the field.
• Internal Diagnositc Program
  Can alert maintenance to component failures or operating problems. Fourteen numeric service error codes stored in memory facilitate rapid unit diagnostics.
• Room Freeze Protection
  Initiates heat if temperature falls to 50°F in an unoccupied room.
• Random Compressor Restart
  Protects electrical systems from overload when power is restored.
• Tamper Resistant-Anodized Stamped Aluminum Grille
  Withstands chalking and oxidation.
• Break-Proof Control Door Design
  Maintains the integrity of the unit.
• Indoor Coil Frost Sensor
  Protects the compressor to lengthen the life of the unit.
• Diamonblue Advanced Corrosion Protection
  Comes standard on all PTACs for long life in harsh coastal environments.
• RJ45 Communication Plug
  This enables a more balanced communication signal, allowing the FreshAire® PTAC to fully interact with both the VRPX wired and wireless wall controllers. This interaction provides full variable control of the inverter compressor and grants access to our comprehensive energy management suite, which includes room occupancy features
  

Energy Efficient & Energy Smart

• Variable Speed Inverter Compressor
  Delivers EERs up to 12.0 at part load conditions (9,000 Btu model operating at 6,462 Btu).
• R-32 refrigerant
  With low Global Warming Potential.
• Exceptional Energy Management Thermostats
  Available (wired & wireless) with integrated occupancy sensor, five district energy presets and comprehensive remote management capability.*
• Energy Efficient Heat Pump Models
  Available in our complete line.
• Electronic Defrost Control
  Ensures more run time in efficient heat pump mode.
• Electronic Temperature
  Limiting to adjust low/high temperature range limits for reduced energy usage.
• Slinger Ring Technology
  In condensate removal system cools the coil and increases efficiency.
• Central Desk Control Ready
  To allow hotel owners to control units from a central location.

Comfort, Health & IAQ

• Dehumidification Removes Moisture
  In cool mode to improve comfort and reduce the chance of mold and mildew growth.
• Integrated Fresh Air Manifold
  Effectively conditions outside air and meets ASHRAE 62.1 standard for IAQ.
• Intuitive Unit Controls
  Installed on each unit (7-12k-3.5Kw), (15K-5.0 Kw).
• Standard Power Cord
  Creates a wide path air flow that reaches the furthest corner of the guest room more quietly than conventional fans.
• Instant Heat On Heat Pump Models
  Quickly heats a room to the desired temperature for increased comfort.
• Automatic Periodic Sampling Of Room Temperature
  To ensure desired conditions are maintained.
• Reversible Indoor Air Louvers
  To easily change direction of airflow.
• A full complement of Indoor Air Quality Products
  Has been certified through installation and testing to ensure exceptional air quality is achieved when FreshAire® IAQ accessories are added.

Sound Reduction Technology

• Two Permanently Lubricated Fan Motors
  For added durability and reduced sound levels indoors.
• Quiet, Efficient Rotary Compressor
  Mounted with vibration isolators to keep the compressor running smoothly and quietly.
• High-Density Insulation & Steel Inner Wall
  Block outdoor noise.
• Tangential Blower Wheel
  Creates a wide path air flow that reaches the furthest corner of the guest room more quietly than conventional fans.

Ease of Maintenance & Installation

• Modular Product Design
  Ensures easy access to key components for cleaning and repairs, including washable, lift-out air filters.
• Surehold Front Cover System
  Securely attaches the front each time.
• Unit May Be Installed Low
  On the floor.
• Easy Access Air Filters
  Simplify maintenance and extend the life of the product. Filters are washable and replaceable.