Friedrich ZoneAire Premier Package Terminal Air Conditioner with Electric Heat 10,200 BTU in White - PDE09K3SGR3

Friedrich PDE09K3SGR3 ZoneAire Premier Package Terminal Air Conditioner with Electric Heat in White

Our most efficient standard PTAC with exceptional performance and leading warranty for the lowest cost of operation. ZoneAire® Premier PTAC is available in electric heat and heat pump options, ranging from 7,000 to 15,000 Btu. Breathe easy with the all-new line-up of FreshAire® IAQ accessories to deliver healthy indoor air. 

Features

Durable Construction

• Stainless Steel Endplates
  Reduce outdoor coil corrosion.
• Galvanized Sinc Coated Steel Wall Sleeve & Steel Base Pan
  Undergo an 11-step preparation process, are powder coated with a polyester finish and cured in an oven for exceptional durability.
• Additional Heating Element Bottom Plate
  Above an improved heat shield provides extra thermal protection.
• Additional Thermistor On The Blower Scroll Outlet
  Regulates internal temperature.
• Factory Run-Tested Units
  Reduce problems in the field.
• Internal Diagnositc Program
  Can alert maintenance to component failures or operating problems. Fourteen numeric service error codes stored in memory facilitate rapid unit diagnostics.
• Easy Access Filters
  Simplify maintenance and extend the life of the product.
• Room Freeze Protection
  Initiates heat if temperature falls to 40°F in an unoccupied room
• Random Compressor Restart
  Protects electrical systems from overload when power is restored.
• Tamper Resistant-Anodized Stamped Aluminum Grille
  Withstands chalking and oxidation.
• Break-Proof Control Door Design
  Maintains the integrity of the unit.
• Indoor Coil Frost Sensor
  Protects the compressor to lengthen the life of the unit.
• Diamonblue Advanced Corrosion Protection
  Protects the outdoor coil from harsh environments.

Energy Efficient & Energy Smart

• Super-Efficient Refrigeration Design
  with EERs up to 13.0 and COP up to 3.6.
• Exceptional FriedrichLink®
  Energy management thermostats available (wired & wireless) with integrated occupancy sensor, f ive distinct energy presets and comprehensive remote management capability.*
• Advanced Coil Design
  Adds more surface area leading to higher efficiencies.
• Thicker Steel Inner-Wall & Foam Construction
  Decreases thermal transfer and energy loss.
• Energy Efficient Heat Pump
  Models available in our complete line.
• Electronic Defrost Control
  Ensures more run time in efficient heat pump mode.
• Electronic Temperature Limiting
  To adjust low/ high temperature range limits for reduced energy usage.
• Slinger Ring Technology
  In condensate removal system cools the coil and increases efficiency.
• Desk Control Ready
  Allow hotel owners to control units from a central location.

Sound Reduction Technology

• Two Permanently Lubricated Fan Motors
  For added durability and reduced sound levels indoors.
• Quiet, Efficient Rotary Compressor
  Mounted with vibration isolators to keep the compressor running smoothly and quietly.
• High-Density Insulation & Steel Inner Wall
  Block outdoor noise
• Tangential Blower Wheel
  Creates a wide path air flow that reaches the furthest corner of the guest room more quietly than conventional fans.

FreshAire IAQ Ready

• A full complement of Indoor Air Quality Products
  Has been certified through installation and testing to ensure exceptional air quality is achieved when FreshAire® IAQ accessories are added
• Dehumidification
  Removes up to 3.1 pints/hr of moisture in cool mode to improve comfort and reduce the chance of mold and mildew growth.
• Constant Fan Mode
  Provides continuous fan operation in cooling or heating modes to create a steady stream of white noise that masks sound level changes when the compressor cycles on/off.
• Fresh Air Damper
  Brings in fresh outside air when desired.
• Intuitive Unit Controls
  User friendly with easy-to-read LED display that can show either set-point or actual room temperature as selected by owner.
• Air Filters
  Are easy to access and washable.
• Instant Heat On Heat Pump Models
  Quickly heats a room to the desired temperature for increased comfort.
• Even-Heat Monitoring
  Checks room temperature and automatically adds heat boost if necessary.
• Automatic Periodic Sampling Of Room Temperature
  Ensure desired conditions are maintained.
• Reversible Indoor Air Louvers
  To easily change airflow direction.

Ease of Maintenance & Installation

• Modular Product Design
  Ensures easy access to key components for cleaning and repairs, including washable, lift-out air filters.
• Remote Thermostat Pop-Out Wiring Module
  Allows easier wiring and unit change out without rewiring thermostat.
• Standard Power Cord
  Installed on each unit (7-12k-3.5KW), (15K-5.0 KW)
• Compact Front
  Designed to preserve indoor f loor space with a depth of 7¾ inches.
• Surehold Front Cover System
  Securely attaches the front each time.
• Inner Wall Service Plate
  Pprovides service access to tangential blower bearing without having to open up the entire inner wall.
• Unit May Be Installed Flush With Floor