JL Audio 2-Channel Class D Full Range Car/Marine Amplifier - 010-03114-00

JL Audio 98679 2-Channel Class D Full Range Car/Marine Amplifier

The tiny XDM200/2 packs a serious full-range punch, delivering a staggering 100 watts per channel into 2 ohms (14.4V, 1% THD). The technology that makes this much power possible in such a compact chassis is our advanced NexD™ high-speed switching design, which permits full bandwidth Class D operation with extremely low distortion and remarkable efficiency.

Suitable for car or boat installations, the XDM200/2 is built with marine-grade materials and features an exclusive, dual-mode input filter for noise-free performance in boats or cars. Automatic turn-on capability (via signal sensing or DC-offset sensing) is also onboard for easy factory system upgrades.

The XDM200/2 includes a 12 dB / octave filter which can be configured as a low-pass or high-pass filter and offers continuously variable cutoff frequency selection from 50-500 Hz. With the addition of an optional HD-RLC or MHD-RLC (water-resistant) remote level controller (each sold separately), the amplifier's level can be adjusted directly from the driver's seat or cockpit.

Finished in a sleek, black powder-coat, all controls are protected beneath a gasketed, removable top cover for easy access.

Features

• NexD™ Switching Technology
  NexD™ amplifier technologies produce exceptional audio quality, unsurpassed total efficiency and high power from very compact amplifier designs.
• Advanced Rollback Protection
  JL Audio's exclusive Advanced Rollback Protection circuit monitors the amplifier's thermal condition and adjusts amplifier operation to eliminate annoying amplifier shut-down events.
• Differential-Balanced Inputs
  JL Audio’s Differential-Balanced Inputs are engineered to combat induced cable noise, which is a common problem in car and marine audio installations. This technology allows for the use of conventional RCA cables, while delivering many of the benefits of a true balanced connection and accepting a wide range of input signal levels.

Specifications

Rated Continous (RMS) Power @ 14.4V

• @ 4 Ω: 75 W RMS x 2
• @ 3 Ω: 100 W RMS x 2
• Bridged @ 4Ω: 200 W RMS x 1

Rated Continuous (RMS) Power @ 12.5 V

• @ 4 Ω: 60 W RMS x 2
• @ 3 Ω: 90 W RMS x 2
• Bridged @ 4Ω: 180 W RMS x 1

General

• Frequency Response: 12 Hz - 22 kHz (+0, -1dB)
• S/N Ratio, referred to highest rated power: >104 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth)
• S/N Ratio, referred to 1 W: >84 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth)
• Damping Factor @ 4 Ω: >150 / 50 Hz
• Damping Factor @ 2 Ω: >75 / 50 Hz
• THD+N @ Rated Power: <1% @ 2 Ω per Ch.
• Input Voltage Range @ RCA Inputs: 200 mV - 4 V RMS
• Min.Copper Power / Ground Wire Gauge: 8 AWG wire
• Fuse Rating: 20 A (AFS, AGU or MaxiFuse™)

Signal Processing

• Filter Mode(s): Low-Pass or High-Pass
• Filter Slope(s): 12 dB/octave
• Filter Frequency Range: 50 Hz - 500 Hz
• Detented, Calibrated Filter Freq. Potentiometers: Yes
• Filter Defeat Function: Yes
• Output Polarity Switch: No
• Remote Level Control: Optional HD-RLC or MHD-RLC (water-resistant)
• Security Cover for Controls: Yes
• Pass-Through Preamp Output: Buffered