Lutron Caseta Wireless Smart Bridge Home Kit - L-BDG2-WH

Lutron L-BDG2-WH Caseta Wireless Smart Bridge Home Kit

Key Features:

• Supports up to 50 wireless devices (Caséta Wireless dimmers, plug-in dimmers, and switches, Pico remote controls, wireless shades)
• Programmed via the Lutron App (available for iOS and Android)
• Scene control via the Lutron App
• Timeclock scheduling of daily events via the Lutron App
• Connects to Wi-Fi router via Ethernet
• Local device operation will continue to function if internet connection is lost or Smart Bridge is powered down or not communicating
• System access from anywhere in the world using the Lutron App
• Supports Caséta Wireless devices, Serena shades, and Pico remote controls
• Control outside the app via widgets (iOS and Android)
• Supports Geofencing from the Lutron App
• Control from Apple Watch
• Supports Siri and Apple HomeKit technology

Features:

Regulatory Approvals

• cULus Listed
• NOM certified
• FCC approved. Complies with the limits of a Class B digital device, pursuant to Part 15 of the FCC rules
• IC certified
• COFETEL certified

Power

• 5 V- 300 mA
• Power Supply (included): 5 V- 550 mA, cable length 6 ft (1.83 m)

Typical Power Consumption

• Lutron Smart Bridge: 1.3 W
• Test Conditions: LED on, Ethernet cable plugged in, powered by the 5 V- adapter

Environment

• Ambient operating temperature: 32 °F to 104 °F (0 °C to 40 °C)
• 0% to 90% humidity, non-condensing
• Indoor use only

Communications

• All devices must be located within 30 ft (9 m) of Smart Bridge
• System devices operate on frequencies between 431.0 MHz to 437 MHz
• Internet connection required for initial setup and to maintain system date/time and receive periodic firmware updates

Protection

• Tested to withstand electrostatic discharge without damage or memory loss in accordance with IEC 61000-4-2
• Tested to withstand surge voltages without damage or loss of operation, in accordance with IEEE C62.41-1991

Power Failure Memory

• Should power be interrupted, the Smart Bridge will return to its previous state when power is restored

Connections

• Ethernet: 3 ft (0.92 m) cable included (for internet and Lutron App connection)
• USB (power only)