MartinLogan Motion Discrete Cinema LCR5 2.5-Way On-Wall LCR Speaker for 65-Inch TVs in Black (Each) - DISCRETECINEMALCR5

MartinLogan DISCRETECINEMALCR5 Motion Discrete Cinema LCR5 2.5-Way On-Wall LCR Speaker for 65-Inch TVs in Black (Each)

The MartinLogan DISCRETECINEMALCR5, part of the Motion Discrete Cinema Series, is a five-driver single-channel LCR or surround speaker scaled for 65 in class displays. A sealed aluminum cabinet houses a Gen2 Folded Motion Tweeter with Folded Motion Waveguide plus two active and two passive 4 in woven fiberglass cones, supporting a 70-25,000 Hz +/- 3 dB response, 93 dB sensitivity and controlled 90 degrees x 90 degrees tweeter dispersion. Horizontal or vertical mounting supports left, center, right or surround use, while the included low-profile bracket, hidden hardware and rear cable routing create a discreet installation.

This black speaker is sold as each, not as a pair¹. MartinLogan recommends adding at least one compatible high-performance subwoofer for full-spectrum home theater reproduction².

Key Features

Five-Driver Design for 65 in Class Displays

This five-driver speaker is scaled to complement a 65 in class television, pairing the visual proportion of the cabinet with a soundstage intended to feel expansive without making the speaker visually dominant. Straight lines echo a flat-panel bezel, while curved endcaps soften the profile.

Gen2 Folded Motion High-Frequency Detail

A 1 in x 1.4 in Gen2 Folded Motion Tweeter works with the Folded Motion Waveguide to produce precise high-frequency detail. Its 90 degrees x 90 degrees dispersion controls how treble spreads into the room, helping reduce unwanted reflections while maintaining broad coverage.

Woven Fiberglass Midrange and Bass

Two active and two passive 4 in woven fiberglass unibody cones use rigid, low-mass construction to bring impact from a shallow enclosure. The cone material comes from the same family used in current full-size Motion speakers, supporting timbre matching in a mixed Motion system.

Rigid Sealed Aluminum Cabinet

Extruded aluminum creates thin, strong walls that preserve useful internal air volume while resisting cabinet flex. This structure gives the speaker a slim sealed enclosure designed for clean reproduction rather than a furniture-sized profile.

Horizontal or Vertical LCR Placement

For center-channel placement, install the speaker horizontally near the display. Vertical positioning supports left or right channel use, and the same cabinet can serve as a low-profile surround when building a cohesive multichannel system.

Included Low-Profile Wall Mount

The supplied ultra-slim bracket keeps the cabinet close to the wall and allows micro-adjustment for precise alignment. Hidden attachment hardware, rear cable-routing channels and a removable tension-lever connector preserve the clean look while letting speaker wire be terminated before the cabinet is hung.

Optional Display-Centric Mounting

A sold-separately bracket can connect through television VESA or frame mounting points, allowing the speaker to move with an articulating display and helping control the visible gap between the screen and cabinet³.

Amplifier and System Matching

The speaker's 4 Ohm impedance is compatible with amplifiers rated for 4, 6 or 8 Ohms, and MartinLogan recommends 20-140 watts of amplifier power. Its 93 dB sensitivity supports authoritative output while the 2.5-way crossover coordinates the five-driver design.

Features

• 65 in Class Five-Driver Design
  Matches the visual scale of a 65 in class display with an appropriately scaled soundstage.
• Gen2 Folded Motion Tweeter and Waveguide
  Delivers detailed high frequencies through a folded diaphragm and optimized waveguide.
• 90 Degrees x 90 Degrees Tweeter Dispersion
  Controls high-frequency coverage to help limit unwanted room reflections.
• Four 4 in Woven Fiberglass Cones
  Two active and two passive unibody cones combine low mass and rigidity in a shallow cabinet.
• Sealed Extruded Aluminum Enclosure
  Thin, rigid cabinet walls maximize useful internal volume and resist vibration.
• 70-25,000 Hz +/- 3 dB Frequency Response
  Covers the speaker's intended midrange and high-frequency range with published accuracy.
• 93 dB Sensitivity
  Supports strong output from the slim five-driver design.
• 20-140 Watt Amplifier Recommendation
  A 4 Ohm load works with amplifiers rated for 4, 6 or 8 Ohms.
• Horizontal or Vertical LCR Use
  Serves as a left, center, right or surround channel to suit the system layout.
• Included Ultra-Slim Wall Bracket
  Supports close-to-wall placement with micro-adjustment for careful alignment.
• Optional Display-Centric Bracket
  Attaches through compatible television mounting points so the speaker can move with an articulating display³.
• Built-In Cable Management and Hidden Hardware
  Rear channels conceal speaker wire and mounting points for a cleaner installation.
• Removable Tension-Lever Connector
  Lets the installer terminate speaker wire before lifting and hanging the cabinet.

Footnotes:

¹ This speaker is sold as each, not as a pair.

² A compatible high-performance subwoofer is recommended for full-spectrum reproduction and is not included with this single speaker.

³ The display-centric mounting bracket is optional and sold separately.

Wall-mount screws are not included; use hardware appropriate for the wall type and speaker weight.