Metra Chevrolet Camaro 2016-2018 Radio Installation Kit - AXPIO-CAM1
Metra AXPIO-CAM1 Chevrolet Camaro 2016-2018 Radio Installation Kit
The new AXPIO-CAM1 is a fully integrated dash kit package designed specifically for select Pioneer® receivers*. This complete solution features an AXPIO Series interface, vehicle-specific harnessing, a dash kit, and more. Vehicle information and settings controlled on the factory screen are retained, displayed, and controlled on the Pioneer® touchscreen. These settings would otherwise be lost after replacing the head unit. The built-in integration technology from Axxess also retains safety chimes through an offboard speaker, retains audio controls on the steering wheel, retains R.A.P. (Retained Accessory Power), and provides accessory power (12-volt-10-amp) and NAV output for parking brake, reverse, and speed sense.
*Refer to radio manufacturer for most current models
Features
- Designed for Pioneer® DMH-WC5700NEX receivers
- Allows for the retention and adjustment of the factory personalization menu through the Pioneer® radio
- Provides a visual view of HVAC and gauges on the Pioneer® screen (cannot be adjusted via the screen)
- This package includes a dash kit, interface with plug-n-play harnessing, antenna adaptor, and 3’ USB/AUX/HDMI replacement cable with panel.
- Includes radio antenna adaptor for GPS
- Provides accessory power (12V 10-amp)
- Provides NAV outputs (parking brake, reverse, and speed sense)
- Retains audio controls on the steering wheel
- Works in both single and dual-zone vehicles
- Retains safety chimes through an included off-board speaker
- Designed for non-amplified vehicles
- Micro “B” USB updatable
- Dash kit is painted scratch-resistant matte black to match the factory finish
General
Warranty Information
Approximate Weight
Guides
Owner's Manual
Articles
Frequently Asked Questions
-
Yes, this kit is specifically designed for non-amplified vehicles, ensuring proper integration without requiring additional amplification components.
-
The kit retains full functionality of the audio controls on the steering wheel, allowing you to maintain convenient control over your audio system without any interruption.
-
Yes, safety chimes are retained through an included off-board speaker, ensuring important alerts and signals remain audible after installation.
-
It provides navigation outputs including parking brake, reverse, and speed sense, which facilitate seamless integration and functionality of the navigation system.
-
The kit supplies accessory power at 12 volts and 10 amps, supporting the power requirements for the connected Pioneer receiver and related components.
- Compatible with Chevrolet Camaro (2016-2018)
- Designed For Pioneer DMH-WC5700NEX Receiver
- Designed for Non-Amplified Vehicles
- Accessory Power (12-volt 10-amp)
- NAV Outputs (Parking Brake, Reverse, Speed Sense)
- Retains Audio Controls on Steering Wheel
- Works in Both Single and Dual-Zone Vehicles
- Matte Black Finish
- Display Screen Housing
- Display Screen Trim Bezel
- Display Screen Trim
- Brackets
- 6 x Panel Clips
- 4 x Phillips Screws
