Polk Audio Vanishing LS Series 5.25-Inch In-Wall Center Channel Speaker in White (Each) - AW2551
- Sold As Each
- Dual 5.25-Inch Dynamic Balance Polypropylene Woofers
- 10W-150W Recommended Amplifier Power
- 8 Ohms Nominal Impedance
- 91dB (1W/1m) Sensitivity
- 1-Inch Ring-Radiator Tweeter
- Paintable Wafer-Thin Sheer Grille
- White Finish
Polk Audio AW2551 Vanishing LS Series 5.25-Inch In-Wall Center Channel Speaker in White (Each)
The Polk Audio AW2551 Vanishing LS Series in-wall center-channel speaker combines two 5.25 in Dynamic Balance polypropylene mid/woofers, a 1 in ring-radiator tweeter and Power Port bass venting in a horizontal built-in design. Its included white, paintable Wafer-thin Sheer Grille lets you coordinate the finish with your wall, while timbre matching with Legend, Reserve and LSiM speakers supports a consistent home theater front stage. Sold as one speaker, it has an 8-ohm nominal impedance and a recommended amplifier range of 10 to 150 watts per channel.
Key Features
Dynamic Balance Drivers and Ring-Radiator Detail
The lightweight, aerated polypropylene cones are built for midrange clarity, punchy bass and efficient operation. Rubber surrounds complement the two mid/woofers, while the ring-radiator tweeter handles high-frequency reproduction. This driver combination brings the Vanishing LS approach to a dedicated architectural center channel.
Power Port Bass-Vented Design
Power Port puts port geometry to work alongside the bass drivers. A larger effective port area encourages smoother airflow, producing more output with less distortion than conventional ported designs.
Paintable Wafer-thin Sheer Grille
The grille is the visible finishing piece of an in-wall installation. Its wafer-thin profile keeps that detail understated, and the white, paintable finish lets you match it to the surrounding wall rather than leave a contrasting grille.
Timbre-Matched Home Theater Front Stage
Build around Legend, Reserve or LSiM speakers with center-channel voicing matched to those families. Use it as the center channel in home theaters built around Dolby Atmos, DTS:X, Auro 3D or IMAX Enhanced.
8-Ohm System Planning and 91 dB Sensitivity
When choosing an AVR or amplifier, use the 8-ohm nominal load and the recommended 10 to 150 watts per channel as your matching references. That wattage range describes recommended amplification, not a separate continuous power-handling rating. Sensitivity is 91 dB at 1 watt measured at 1 meter. For comparing bass and treble extension, total frequency response is 30 Hz to 33,000 Hz, with -3 dB limits of 44 Hz to 29,000 Hz.
Horizontal Placement and Tweeter Aiming
Plan a horizontal installation with the center speaker as close to ear level as possible. If the speaker must sit higher, aim the tweeter down as needed toward the listening position. This gives you placement guidance for the center channel without assuming it belongs at ceiling height.
Cutout Planning and Included Installation Parts
Use the included wall mounting template to lay out the 7 5/8 in H x 13 1/8 in W cutout, keeping the opening no larger than the traced template. Mounting depth is 3 1/4 in with 1/2 in drywall. Secure the speaker with six screws without overtightening. For new-construction planning, the compatible PB LCiC pre-construction bracket is optional and not included.
Features
- Dual 5.25 in Dynamic Balance Mid/Woofers
Low-mass aerated polypropylene cones reproduce midrange and bass. - 1 in Ring-Radiator Tweeter
A dedicated high-frequency driver complements the dual mid/woofers. - Power Port Technology
Smooth port airflow supports cleaner bass output. - White Paintable Wafer-thin Sheer Grille
Customize the visible finish to coordinate with your decor. - Legend, Reserve and LSiM Timbre Matching
Match center-channel voicing to these Polk Audio speaker families. - Immersive Home Theater Applications
Suited to center-channel duty in Dolby Atmos, DTS:X, Auro 3D and IMAX Enhanced systems. - 8 Ohms and 10-150 Watts Recommended
Use these load and amplifier-power specifications when planning your system. - 91 dB Sensitivity
Rated at 1 watt at 1 meter for output comparisons. - 30 Hz-33,000 Hz Total Frequency Response
The -3 dB response range is 44 Hz to 29,000 Hz. - Horizontal Installation With Tweeter Aiming
Adjust the tweeter downward for an above-ear-level center-channel position. - Single Speaker With Wall Mounting Template
Supplied individually with a template for laying out the wall opening. - Optional PB LCiC Pre-Construction Bracket
The compatible rough-in bracket is not included. - Gold-Plated Push Connectors
A single pair provides the speaker-wire connection. - Designed and Engineered in Baltimore, Maryland
Development emphasizes audio quality, performance and reliability.
Footnotes:
Measured performance figures reflect manufacturer testing under specific conditions and may vary with the room, settings and use.
Related Guides and Articles
Frequently Asked Questions
-
The owner's manual specifies a wall cutout of 7 5/8 in high x 13 1/8 in wide and a mounting depth of 3 1/4 in using 1/2 in drywall. Use the included wall mounting template, and keep the cutout no larger than the traced template.
-
The recommended amplifier power is 10 to 150 watts per channel. Nominal impedance is 8 ohms, and sensitivity is rated at 91 dB at 1 watt from 1 meter.
-
Yes. The included thin Sheer Grille is white and paintable, allowing it to coordinate with your wall color.
-
The speaker is voice-matched to Polk Audio Legend, Reserve, and LSiM speakers for use in a coordinated home theater system.
-
Install horizontally, as close to ear level as possible. If the speaker is installed higher, the owner's manual recommends aiming the tweeter down as needed.