Rockford Fosgate 10" Punch P1 2-Ohm Car Subwoofer - P1S2-10

Rockford Fosgate P1S2-10 10" Punch P1 2-Ohm Car Subwoofer

Rockford Fosgate P1 10” is the first in a family of famous “Punch” subwoofers. The P1S2-10 features a 2-Ohm voice coil, 250 Watts RMS power handling, and can accommodate a grille insert using the included soft touch ABS trim ring.

Rockford Fosgate P1 10" are the first in a family of world famous subwoofers called "The Punch". During their inception in the 1980's, they quickly became "The Woofer of Choice" for fanatic car audio systems, with a continued tradition today. Kevlar fiber reinforced paper cones deliver bass impact you can feel, and our VAST technology increases surface cone area up to 25%. Best in standard sealed and vented enclosures. Includes soft touch ABS trim ring.

Key Features:

• Linear spider with embedded 16 AWG tinsel leads
• High-temp voice coil with spun-laced Nomex® re-inforcement collar
• Kevlar fiber reinforced paper cone
• StampCast basket with integrated spider venting
• Soft touch ABS trim ring with optional grille
• Custom 10-AWG nickel plated push terminals
• Extended pole piece and bumped vented backplate
• Protective PVC textured magnet cover

Features:

• CEA-2031
  Power handling on Rockford Fosgate speakers conform to CEA-2031 industry standards.
• Klippel Verified
  Klippel is a speaker certification program allowing us to deliver the best possible subwoofers.
• Stitched Tinsel Leads
  Improved reliability and performance by reducing fatigue and possible shorting.
• Anodized Aluminum Voice Coil Former
  Rockford Fosgate subwoofers use anodized aluminum voice coil formers that provide superior heat dissipation (up to 100° at full power levels). Unlike traditional plastic substitutions, aluminum acts like a heat-sink to quickly dissipate thermal build-up on the voice coil. This keeps subwoofers cool during high SPL conditions.
• FlexFit Basket - Subwoofer
  The slot mounted frame pattern allows fine-tuning of the subwoofer's mounting position.

Specifications:

• Size: 10"
• Nominal Impedance: 2-Ohm
• Power Handling (Watts RMS):
  • 250 Watts RMS
  • 500 Watts Max
• Voice Coil Diameter: 2.0" (51.6 mm)
• Magnet Weight (oz): 45 oz. 1.28 kg.
• Speaker Connector: Dual 10 AWG compression
• Fs (Hz): 30
• Re (Ohms): 1.60
• Le (mH): 0
• Qms: 2.70
• Qes: 0.75
• Qts: 0.52
• Vas (Liters): 1.4
• Sd (cm2): 370
• SPL (dB @ 1w/1m): 85
• Xmax (mm): 9.0
• Woofer Displacement (in): 0.13 cu. ft. (3.6 Liters)