Rockford Fosgate 10" Punch P2 2-Ohm Car Subwoofer - P2D2-10

Rockford Fosgate P2D2-10 10" Punch P2 2-Ohm Car Subwoofer

The Rockford Fosgate P2 10 inch subwoofer for cars and trucks continues “The PUNCH” tradition. The P2D2-10 sub features a Dual 2-Ohm voice coil (DVC), 300 Watts RMS power handling, and can accommodate a grille insert using the included cast aluminum trim ring.

Rockford Fosgate has always been known as "The PUNCH" and the P2 10" Punch car subwoofer certainly continues with the tradition. Kevlar fiber reinforced paper cones deliver bass impact you can feel along with VAST technology to increase surface cone area up to 25%. The P2 10 inch subwoofers perform best in standard sealed and vented enclosures. Includes diamond cut cast aluminum trim ring.

Key Features:

• Diamond cut cast aluminum trim ring with optional grille
• StampCast basket with integrated spider venting
• Kevlar fiber reinforced paper cone
• Protective PVC textured magnet cover
• High-temp voice coil with spun-laced Nomex® re-inforcement collar
• Extended pole piece and bumped vented backplate
• Custom 10-AWG nickel plated push terminals
• Dual linear spider with embedded 16 AWG tinsel leads

Features:

• CEA-2031
  Power handling on Rockford Fosgate speakers conform to CEA-2031 industry standards.
• Klippel Verified
  Klippel is a speaker certification program allowing us to deliver the best possible subwoofers.
• Stitched Tinsel Leads
  Improved reliability and performance by reducing fatigue and possible shorting.
• Anodized Aluminum Voice Coil Former
  Rockford Fosgate subwoofers use anodized aluminum voice coil formers that provide superior heat dissipation (up to 100° at full power levels). Unlike traditional plastic substitutions, aluminum acts like a heat-sink to quickly dissipate thermal build-up on the voice coil. This keeps subwoofers cool during high SPL conditions.
• VAST Surround - Subs
  The Vertical Attach Surround Technique significantly increases a subwoofer's effective radiating cone area up to 25%.
• FlexFit Basket - Subwoofer
  The slot mounted frame pattern allows fine-tuning of the subwoofer's mounting position.

Specifications:

• Size: 10"
• Nominal Impedance: Dual 2-Ohm
• Power Handling (Watts RMS):
  • 300 Watts RMS
  • 600 Watts Max
• Voice Coil Diameter: 2.25" (57.7 mm)
• Magnet Weight (oz): 66.4 oz. 1.88 kg.
• Speaker Connector: Dual 10 AWG compression
• Fs (Hz): 29
• Re (Ohms): 3.20
• Le (mH): 3.32
• Qms: 7.00
• Qes: 0.54
• Qts: 0.50
• Vas (Liters): 35.4
• Sd (cm2): 360
• SPL (dB @ 1w/1m): 84
• Xmax (mm): 11
• Woofer Displacement (in): 0.088 cu. ft. (2.5 Liters)