StarTech M.2 SSD to 2.5in SATA Adapter Converter - SAT32M225
- Open-Frame Steel Mounting Bracket
- Supports B Key M.2 SSDs
- 2.5in SATA Form Factor Housing
StarTech M.2 SSD to 2.5in SATA Adapter Converter - SAT32M225
Convert an M.2 SSD into a 7mm high 2.5in SATA 6Gbps Open Frame SSD
Vastly increase system performance by adding the speed of an M.2 SSD in any 2.5" SATA application, with the SAT32M225 M.2 SSD to SATA adapter.
Utilize the full potential of your SATA III controller, with an M.2 SSD reducing your data transfer bottleneck with file transfer speeds up to 6 Gbps. M.2 SSDs can also save you money by reducing your power consumption over regular platter drives.
Help protect the health of your drive with an open-frame design that maximizes heat dissipation.
The SAT32M225 is backed by a StarTech.com 2-year warranty, and lifetime technical support.
Features:
- Open-frame steel mounting bracket
- Supports 7mm or larger 2.5" SATA bays
- Supports B key M.2 SSDs
- Support for SATA revision I/II/III (1.5/3.0/6.0 Gbps)
- 2.5in SATA form factor housing
- Supports full length M.2 SSD Solid State Drives (2230, 2242, 2260, 2280)
- Not compatible with M.2 NVMe or AHCI PCI-Express SSDs
Specifications:
Hardware
- Compatible Drive Types: M.2 (NGFF, B-Key)
- Drive Installation: Fixed
- Interface: SATA
- Number of Drives: 1
- Supported Drive Height(s): 2230, 2242, 2260, 2280
Performance
- General Specifications: Not compatible with M.2 NVMe or AHCI PCI-Express SSDs
- Hot Swap Capability: No
- Maximum Data Transfer Rate: 6 Gbps
- Type and Rate: SATA III (6 Gbps)
Connector(s)
- Drive Connectors: 1 - M.2 (NGFF, B-Key) Receptacle
- Host Connectors: 1 - SATA Data & Power Combo (7+15 pin) Receptacle
Software
- OS Compatibility: OS independent; No software or drivers required
Environmental
- Operating Temperature: -40°C to 85°C (-40°F to 185°F)
Included:
- 1 - M.2 NGFF SSD to 2.5in SATA SSD Converter
- 1 - Mounting screw kit
- 1 - Instruction Manual
Approximate Dimensions:
- Height: 0.3"
- Width: 1.3"
- Length: 3.9"
Approximate Weight:
- Shipping: 0.23 lbs
Warranty Information:
- Manufacturer Warranty (authorized online retailer): 2 Years Limited
Related Guides and Articles
Frequently Asked Questions
-
This adapter supports M.2 SSDs with a B key interface, allowing you to convert and use them as standard 2.5 inch SATA drives.
-
It features an open-frame steel mounting bracket designed for easy installation and secure mounting within your computer or enclosure.
-
The adapter converts M.2 SSDs to fit into a 2.5 inch SATA form factor housing, making it compatible with standard SATA drive bays.
-
The adapter measures approximately 6 inches in depth, width, and height, with a unit and shipping weight of about 1 pound.
-
This product was released in January 2018, ensuring compatibility with a wide range of current hardware.
