Vent-A-Hood Designer Concave Wall Mount Hood with Slim Base, Magic Lung Blower 48-Inch Wide in Stainless Steel - JDH348/C1 SS
- 48-Inch Wall Mount Hood
- 900 CFM / 1350 CFM Equivalent
- Magic Lung Blower System
- Dimmable LED Lighting
- Ultra-Quiet Performance
- SensaSource Heat Sensor
- Stainless Steel Finish
Vent-A-Hood JDH348/C1 SS Designer Concave Wall Mount Hood with Slim Base, Magic Lung Blower 48-Inch Wide in Stainless Steel
The Vent-A-Hood JDH348/C1 SS Designer Series 48 in wall-mount range hood combines a graceful concave silhouette and slim base with 900 CFM airflow and 1350 Equivalent CFM.1 Patented Magic Lung technology uses an open canopy and centrifugal filtration to separate 99% of grease without mesh or baffle filters. A 6.3-sone high-speed sound rating of approximately 57 dB, SensaSource heat-responsive blower control, three LED lights with dual-level dimming and a Stainless Steel finish round out this high-capacity ventilation design.
When planning with a range hood sizing guide, select a hood at least as wide as the cooktop, or 3 in to 6 in wider for optimal performance.2 Matching duct covers are sold separately.
Key Features
Magic Lung 99% Grease Separation
Cooking vapors enter the large open canopy, where centrifugal force separates 99% of grease while addressing smoke, heat and odors. Because grease is removed before the airflow reaches the ductwork, the design helps limit buildup and reduce the potential for flame spread.
Quiet 6.3-Sone High-Speed Operation
At high speed, the JDH348/C1 SS is rated at 6.3 sones, or approximately 57 dB. Removing restrictive mesh and baffle filters from the airflow path helps the blower deliver powerful ventilation with less noise than conventional filter-based systems.
E-Z Clean Dishwasher-Safe Components
There are no filters to scrub or replace. The grease collection tray, snap-apart blower housing and blower wheels can all be removed and placed in the dishwasher, simplifying routine cleanup after grease is separated from the air.
SensaSource Automatic Heat Response
The SensaSource heat sensor monitors cooking temperatures and automatically raises blower speed when heat increases. Ventilation responds as cooking intensifies, so there is no need to stop and adjust the hood manually.
Three 2700K LEDs with Dual-Level Dimming
Three warm-white LED lights illuminate the cooking surface, while two lighting levels let you choose brighter task lighting for food preparation or softer illumination for everyday ambiance.
Designer Series Concave Silhouette
Clean lines, a graceful concave profile and a slim base give the Stainless Steel hood a decorative wall-mounted presence. The sculpted form is designed to make high-capacity ventilation part of the kitchen's visual character.
Is the Vent-A-Hood JDH348/C1 SS Right for You?
This model fits shoppers comparing Vent-A-Hood wall-mount range hoods who want a decorative 48 in profile, filterless grease separation and integrated heat-responsive controls. It is also suitable for a covered outdoor application when installed on a GFCI-protected branch circuit.3
Features
- Designer Series 48 in Wall-Mount Hood
A concave silhouette, slim base and Stainless Steel finish create a clean architectural focal point. - 900 CFM Airflow
High-capacity ventilation captures cooking vapors from the open canopy. - 1350 Equivalent CFM
Equivalent CFM provides the manufacturer's comparison value for Magic Lung airflow.1 - Magic Lung Technology
Centrifugal filtration addresses grease, smoke, heat and odors without conventional filters. - 99% Grease Separation
The system removes grease from the airstream instead of relying on mesh or baffle filters. - 6.3 Sones at High Speed
An approximately 57 dB high-speed rating supports powerful ventilation with controlled sound. - E-Z Clean Dishwasher-Safe Components
The removable grease tray, blower housing and blower wheels simplify maintenance. - SensaSource Heat Sensor
Blower speed automatically increases as cooking temperatures rise. - Three 2700K LED Lights
Warm-white lighting provides clear illumination across the cooking surface. - Dual-Level Dimming
Two brightness settings support focused cooking light or softer ambient light. - Enhanced Fire Safety
Separating grease before it enters the ductwork helps reduce buildup and the potential for flame spread. - Covered Outdoor Compatibility
The hood can be used in a covered outdoor application with a GFCI-protected branch circuit. - Matching Duct Covers Sold Separately
Optional coordinating covers can conceal ductwork for a finished installation.
Footnotes:
1 CFM measures ventilation power. Vent-A-Hood advises using Equivalent CFM when comparing Magic Lung airflow with other brands because the system moves air more efficiently.
2 Choose a hood at least as wide as the cooktop, or 3 in to 6 in wider for optimal performance.
3 Covered outdoor installation requires a GFCI-protected branch circuit.
Related Guides and Articles
Frequently Asked Questions
-
It provides 900 CFM of airflow and 1350 Equivalent CFM. Equivalent CFM reflects the efficient airflow performance of Magic Lung technology and is intended for comparisons with other ventilation systems.
-
No mesh or baffle grease filters are required. Magic Lung centrifugal filtration separates 99% of grease from the airflow, and the E-Z Clean grease collection tray, snap-apart blower housing and blower wheels are removable and dishwasher-safe.
-
The high-speed sound rating is 6.3 sones, or approximately 57 dB. The filterless Magic Lung design avoids the airflow restrictions of mesh or baffle filters for powerful ventilation with significantly less noise than conventional filter-based systems.
-
The 900 CFM blower configuration requires a minimum 10 in round duct with 79 sq. in. of area. Use smooth galvanized metal ductwork vented outdoors; do not use flexible or corrugated duct or reduce the duct size. A VP562 transition is included and factory-installed when crating permits.
-
The Magic Lung limited warranty covers parts for five years and labor for one year from the purchase date for the original owner. Warranty claims should be made through the authorized dealer where it was purchased or the regional Vent-A-Hood distributor; direct product registration is not required.