Audiofrog GS Series 6" Coaxial Car Speakers (Pair) - GS62
Audiofrog GS62 GS Series 6" Coaxial Car Speakers (Pair)
Designed as an easily installed premium upgrade, the GS62 includes a proprietary injection-molded ABS and fiberglass vented basket. Ease of installation is ensured with a 1” fabric dome neodymium tweeter that extends a mere 2mm above the surround–sure to fit under factory grilles. The tweeter faceplate includes a small waveguide designed to boost the tweeter’s low frequencies and ensure a smooth transition to the midrange. That transition is also controlled by a 12dB/octave high pass filter and 6dB/octave low pass filter. The entire crossover network is mounted to a PC board integrated into the basket, which also secures the terminals. The GS62 woofer includes a 1” copper voice coil wound on a Kapton® former for superior power handling. A multiadapter is included in the kit for easy installation in a variety of factory locations.
Features:
- Injection molded ABS plastic and fiberglass vented basket
- Parabolic polypropylene cone
- Nitrile butadiene rubber rurround
- 1" (25mm) copper voice coil on Kapton® former
- Flat progressive Nomex® spider
- Ferrite magnet
- 1" (25mm) fabric dome neodymium tweeter
- Tweeter includes reflection absorbing and diffusing foam pad
- Low-profile tweeter waveguide helps to provide smooth transition to the midrange
- Fast-on terminals secured with integrated PC board
- Integrated passive crossover (12dB/octave high pass and 6dB/octave low pass)
- Grille and multiadapter included
Specifications:
- Nominal Impedance: 4Ω
- RMS Power Handling: 70 W (with recommended crossover)
- Peak Power Handling: 200 W (with recommended crossover)
- Frequency Response: 50 Hz – 20 kHz
- Sensitivity (2.83 V/1 M): 89 dB
- Recommended Amplifier RMS Power Range: 15 W – 75 W
- Thiele And Small Parameters:
- Revc: 2.28 Ω
- Levc@1kHz: 0.14 mH
- Sd: 138.93 cm²
- Mmd: 11.8 g
- Mms: 12.75 g
- Cms: 306.5 µM/N
- Vas: 8.45 liters
- Fs: 80.5 Hz
- BL: 4.4 TM
- Qms: 6.33
- Qes: 0.76
- Qts: 0.67
- Xmax (1-way linear): 4 mm (3/16")
- Basket Displacement: 0.33 liters (0.011ft³)
General
Approximate Dimensions
Approximate Weight
Guides
Owner's Manual
Frequently Asked Questions
-
The speakers handle 75 Watts RMS power continuously and can peak at 200 Watts. This means they can deliver strong audio performance suitable for most car audio systems.
-
The frequency response of these speakers ranges from 50 Hz to 20 kHz, providing clear sound across a wide range of audio frequencies including deep bass and high treble.
-
They are 2-way coaxial speakers consisting of a parabolic polypropylene cone woofer and a 1 inch fabric dome neodymium tweeter, delivering balanced sound with detailed highs and robust lows.
-
The cutout diameter required for installation is 5.13 inches, with a mounting depth of 2.03 inches, ensuring compatibility with most standard 6 inch speaker locations.
-
The speakers feature a ferrite magnet, an injection molded ABS plastic and fiberglass vented basket for durability, a nitrile butadiene rubber surround for flexibility, and a fabric dome neodymium tweeter for clear high frequencies.
- 70 Watts RMS Power Handling
- 200 Watts Peak Power Handlin
- 4 Ohms Nominal Impedance
- Injection Molded ABS Plastic And Fiberglass Vented Basket
- Parabolic Polypropylene Cone
- Nitrile Butadiene Rubber Surround
- Ferrite Magnet
- 1 " (25mm) Fabric Dome Neodymium Tweeter
- Grille And Multiadapter Included
- Black Finish
Guides
