Audiofrog Performance Grade 6" Car Speaker Component System (Pair) - G60S
Audiofrog G60S Performance Grade 6" Car Speaker Component System (Pair)
Featuring a 6-1/2” woofer with a polypropylene cone and rubber surround, a 1” fabric dome tweeter and inline crossovers, the G60S is designed to make installation easy and to provide the market leading performance you’ve come to expect from Audiofrog.
The woofer’s steel basket is shallow enough to fit nearly every factory-provided 6” location and the tweeter mounting kit can be completely dismantled so the tweeter can be easily installed in factory tweeter locations. No factory location for the tweeter No problem. The G60S includes innovative flush mount kits that make adding a tweeter in the right location simple.
Inline crossovers make running wires in and out of door grommets a thing of the past. The small tweeter crossover can be mounted close to the tweeter and the crossover for the woofer can be mounted near the woofer. That’s a big time saver when woofers will be mounted in the doors and the tweeters in the dashboard or in the A-pillar.
Features:
- Rigid and shallow steel woofer basket
- Parabolic polypropylene woofer cone
- Nitrile butadiene rubber surround
- 1” (25mm) copper voice coil on Kapton® former
- Flat progressive Nomex® spider
- Ferrite magnet
- 1” (25mm) fabric dome neodymium tweeters
- Tweeters include reflection absorbing and diffusing foam pad
- Convenient and innovative tweeter flush mounting kit
- In-line crossovers with speaker connectors already installed
- 12dB/octave tweeter high pass filter with protection circuit
- 6dB/octave woofer low pass filter
- Multiadapter included for factory fitment in many cars
Specifications:
- Nominal Impedance: 4 Ω
- RMS Power Handling: 50 W (with crossover)
- Peak Power Handling: 120 W (with crossover)
- Frequency Response: 50 Hz – 20 kHz
- Sensitivity (2.83 V/1 M): 89 dB
- Recommended Amplifier RMS Power Range: 15 W – 75 W
- Thiele And Small Parameters (Woofer):
- Revc: 2.25 Ω
- Levc@1kHz: 0.13 mH
- Sd: 143.14 cm²
- Mmd: 11.8 g
- Mms: 12.37 g
- Cms: 317 µM/N
- Vas: 9.12 liters
- Fs: 80.39 Hz
- BL: 3.91 TM
- Qms: 7.89
- Qes: ..92
- Qts: 0..83
- Xmax (1-way linear): 4 mm (5/32”)
- Basket Displacement: 0.24 liters (0.008 ft³)
- Thiele And Small Parameters (Tweeter):
- Fs: 1.5 kHz
- Revc: 4 Ω
Approximate Dimensions:
- Cut-out Diameter (woofer): 5-7/32"
- Overall Diameter (woofer): 6-15/64"
- Overall Diameter Including Mounting Tabs (woofer): 6-17/32"
- Mounting Depth (woofer): 2-1/64"
- Mounting Height (woofer): 15/32"
- Cut-out Diameter (tweeter flush mount): 1-57/64"
- Overall Diameter (tweeter flush mount): 2-1/8"
- Mounting Depth (tweeter flush mount): 33/64"
General
Approximate Dimensions
Approximate Weight
Guides
Frequently Asked Questions
-
The power handling capacity includes a peak power of 120 watts and an RMS (continuous) power handling of 50 watts, ensuring reliable performance under regular use and the ability to handle short bursts of higher power.
-
The speaker size is 6 inches with a cutout diameter of 5.22 inches and a mounting depth of 2.02 inches. It includes a multiadapter for factory fitment in many cars, making installation convenient.
-
The speaker features a rigid and shallow steel woofer basket, a parabolic polypropylene woofer cone, nitrile butadiene rubber surround, and a flat progressive Nomex spider, all contributing to durability and sound quality.
-
Yes, it comes with in-line crossovers with speaker connectors pre-installed and a convenient flush mounting kit for the tweeter, facilitating efficient sound separation and easy installation.
-
The frequency response range extends from 50 Hz to 20 kHz, covering a wide spectrum that allows for rich bass and clear high frequencies, suitable for various music genres.