Cicada Audio 1400W 4Ch DSP Amplifier and 4 Pro Coaxial Horn Speakers H-D Complete System - 14FLXPCHX-4X4

Cicada Audio 14FLXPCHX-4X4 1400W 4Ch DSP Amplifier and 4 Pro Coaxial Horn Speakers H-D Complete System

The Cicada Audio 14FLXPCHX-4X4 complete motorcycle audio kit upgrades the front fairing and saddlebags of 2014-2023 Harley-Davidson Street Glide and Road Glide motorcycles with a four-channel Class-D amplifier and four Pro coaxial horn speakers. The amplifier delivers 350W RMS x 4 at 2 ohms and 14.4V, with six-channel DSP, Bluetooth audio streaming and DIALD PC/App tuning. Two 6.5-in speakers and two 6x9-in speakers cover the fairing and saddlebag locations, while supplied harnesses, 4 AWG power wiring, grilles, racks and cut-in mounting hardware bring the upgrade together.

Key Features

Six-Channel DSP and Class-D Power

Beyond the four amplified channels, two pass-through channels extend the DSP's processing options. Select high-pass, band-pass or low-pass crossovers and slopes of 6, 12, 24 or 48 dB per octave to tailor frequency delivery. A Class-D IR chipset supports efficient operation, while an extruded aluminum heatsink provides heat management.

DIALD Tuning and Bluetooth Streaming

DIALD PC/App configuration gives you access to tuning adjustments, including iOS compatibility and a USB-C connection for PC setup. Bluetooth audio streaming handles music playback, while adjustable input sensitivity and selectable turn-on modes help the installer integrate the amplifier with the motorcycle's audio system.

Four Pro Coaxial Horn Speakers

Carbon Matrix Composite cones and aluminum tweeter domes pair with high-grade neodymium motors in custom-tooled diecast aluminum baskets. External crossovers and selectable -3 dB or -6 dB tweeter attenuation give the installer control over high-frequency balance, while removable horn flanges add mounting flexibility.

Engineered to Take the Heat

Vortex Flow Venting assists speaker cooling during demanding playback. Heat-resistant voice-coil construction brings together TIL composite coil formers, flat-wound copper and Black Coat thermoset resin to address the heat of high-output motorcycle audio.

Rain or Shine Pro Construction

Rain or Shine Pro speaker construction and Nanofram horn covers address exposure to rain, moisture and UV on the road. The amplifier takes its own protective approach with conformal coating that addresses moisture, dust and vibration. ICAD overload protection and clipping/status LEDs add protection and help you monitor amplifier operation.

Plug-n-Play Wiring and Motorcycle-Specific Racks

The included harness kit supplies front and rear Molex input harnesses with 47-ohm resistors, front and rear output harnesses, and a 6 ft rear-output extension. A 4-gauge power/ground kit handles power wiring, bringing the input, output and power connections into one installation package.

Both Road Glide and Street Glide amplifier racks are supplied. The Road Glide rack positions the amplifier under the fairing radio; the Street Glide rack locates it between the head unit and headlight. Both use powder-coated stainless steel and include mounting hardware, with amplifier brackets supplied for other mounting options.

Factory-Style Fairing and Saddlebag Installation

Two Road Glide kidney grilles and two Street Glide round grilles are included, both using powder-coated metal mesh. The Street Glide replacements add depth for Cicada Audio speakers. For the saddlebags, molded ABS frames and powder-coated stamped steel grille inserts give the cut-in mounting kit a clean, factory-style appearance.¹ Single-use ABS jigs guide cutting and alignment; this is a speaker cut-in mounting kit, not a set of replacement lids.

Features

• 350W RMS x 4 at 2 Ohms
  Rated at 14.4V, the amplifier also supports an alternate two-channel, 4-ohm bridged configuration.
• Six-Channel DSP
  HP/BP/LP crossovers and selectable 6/12/24/48 dB-per-octave slopes shape speaker output.
• DIALD PC/App Tuning
  Use PC or app-based controls, with iOS compatibility and USB-C PC configuration.
• Bluetooth Audio Streaming
  Send music to the amplifier over Bluetooth.
• Flexible Connections and Turn-On Modes
  Adjust input sensitivity, select 2CH/4CH inputs and REM/DC/VOX turn-on modes, and connect speakers through 12 AWG busbar outputs.
• Four Pro Coaxial Horn Speakers
  Two 6.5-in and two 6x9-in units combine CMC cones, aluminum tweeter domes and neodymium motors.
• External Crossovers and Removable Horn Flanges
  Set tweeter attenuation to -3 dB or -6 dB and adapt horn mounting for the installation.
• Vortex Flow Venting
  Cooling provisions and heat-resistant voice coils support demanding playback.
• Rain or Shine Pro and Nanofram Covers
  Speaker construction addresses rain, moisture and UV exposure.
• Conformal Coating and ICAD Protection
  Environmental coating, overload protection and clipping/status LEDs help safeguard and monitor the amplifier.
• 4 AWG Power/Ground and Molex Harnesses
  Front/rear input and output wiring includes 47-ohm input resistors and a 6 ft rear-output extension.
• Road Glide and Street Glide Amplifier Racks
  Both powder-coated stainless-steel racks include mounting hardware for their motorcycle-specific locations.
• Road Glide and Street Glide Fairing Grilles
  Included kidney and round replacement grilles provide powder-coated metal mesh, with added speaker depth in the Street Glide design.
• Saddlebag Lid Cut-In Mounting Kit
  Molded frames, protective grilles and single-use alignment jigs support a factory-style installation that requires cutting.

Footnotes:

¹ The saddlebag lid cut-in mounting kit excludes saddlebags with electric locks and is not designed for 2024 saddlebag lids.