Cicada Audio 5.25-Inch Pro 2-Ohm Coaxial Horn Motorcycle Speakers (Pair) - CHX525.2PRO
- Sold As A Pair
- 300W RMS/600W Max Power
- 5.25-Inch 2-Ohm Coaxial Horn Speakers
- 75 Hz - 20 kHz Response
- 92dB Sensitivity
- Nanofram Rain-Protective Horn Cover
- UV And Moisture Resistant Design
- External 12dB Encased Crossover
- Carbon Matrix Composite Cone
- Black and Silver Finish
Cicada Audio CHX525.2PRO 5.25-Inch Pro 2-Ohm Coaxial Horn Motorcycle Speakers (Pair)
The Cicada Audio CHX525.2PRO 5.25-in PRO motorcycle coaxial horn speakers combine 2-ohm impedance, Carbon Matrix Composite cones and external 12 dB filtering in a pair designed for motorcycle audio. Vortex Flow Venting helps cool the voice coil during demanding playback, while Rain or Shine Pro construction adds UV and moisture resistance. Built around output over road noise, the design uses compact N45SH neodymium motors and an aluminum tweeter diaphragm to balance power capability with high-frequency character.
Key Features
CMC Cones and Vortex Flow Venting
High-output playback calls for a cone that can react quickly while standing up to heat. Carbon Matrix Composite construction combines low moving mass with strength and temperature resistance. Behind the cone, a lightweight TIL composite former, flat-wound copper wire and Black Coat high-temperature thermoset resin support voice-coil endurance. The custom diecast aluminum basket's Vortex Flow Venting helps carry heat away from the coil when the speaker is driven hard.
N45SH Neodymium Motors and Fast Response
When road noise competes with your music, output and quick response matter. High-grade N45SH neodymium motors provide power capability in a compact structure, and a lightweight, low-profile cloth surround supports faster cone response and higher sound pressure levels. The aluminum tweeter diaphragm complements the cone's tonal character, bringing attention to tonal balance as well as output.
Motorcycle Fitment and Adjustable Tweeter Output
Mounting is designed for 1998-2013 H-D fairings and 2014 and newer Indian Chieftain, Roadmaster, Challenger and Pursuit motorcycles. A removable threaded horn flange simplifies modification during installation, giving you access to adapt the horn assembly for the stated applications.
The external crossover uses a custom-tooled, vented enclosure with 12 dB filtering at 4 kHz. Optional -3 dB or -6 dB tweeter attenuation through a heatsink-encased resistor lets you reduce the high-frequency level to suit the system.
Rain or Shine Pro and Nanofram Protection
Outdoor protection has to account for more than an occasional shower. Rain or Shine Pro addresses direct sunlight, wet weather and high humidity through UV- and moisture-resistant construction. The proprietary Nanofram horn cover focuses rain protection at the horn while retaining the acoustic clarity and output that motorcycle listening demands.
Features
- Carbon Matrix Composite Cones
Low moving mass and heat-resistant strength support loud playback. - Advanced Voice-Coil Construction
A TIL composite former, flat-wound copper wire and Black Coat resin address demanding heat conditions. - Diecast Aluminum Basket With Vortex Flow Venting
Venting helps cool the voice coil during hard use. - N45SH Neodymium Motors
High-grade neodymium provides power capability without a bulky motor structure. - Lightweight Cloth Surround
The low-profile design supports quick response and higher sound pressure levels. - Aluminum Tweeter Diaphragm
Complements the cone's sound with high-frequency tonal character. - H-D and Indian Motorcycle Fitment
Designed for 1998-2013 H-D fairings and 2014 and newer Indian Chieftain, Roadmaster, Challenger and Pursuit motorcycles. - External 12 dB Crossover at 4 kHz
Optional -3 dB or -6 dB resistor attenuation lets you lower tweeter output. - Removable Threaded Horn Flange
The flange unscrews to ease installation modifications. - Nanofram Horn Cover
Shields against rain while preserving clear, strong playback. - Rain or Shine Pro Construction
Adds UV and moisture resistance for outdoor motorcycle use. - Designed in the USA
Developed for motorcycle audio applications.
Related Guides and Articles
Frequently Asked Questions
-
The manufacturer lists power handling at 300 W RMS and 600 W maximum. It does not specify whether these ratings apply to each speaker or the pair.
-
The design provides UV and moisture resistance for exposure to sunlight, rain, and high humidity. A proprietary Nanofram horn cover helps protect against rain while preserving clarity and output. No numerical IP rating or submersion rating is published, so weather resistance should not be treated as a waterproof rating.
-
The published mounting depth is 2.64 in (67 mm), and the published mounting diameter is 5.67 in (144 mm). Verify installation clearance using these mounting dimensions rather than the nominal speaker size. A removable threaded horn flange allows easier modification during installation.
-
Optional -3 dB and -6 dB tweeter attenuation is available via a heatsink-encased resistor. The external crossover provides 12 dB filtering at 4 kHz. The manufacturer does not specify included resistor quantities.
-
The published frequency response is 75 Hz to 20 kHz, +/- 3 dB. Sensitivity is rated at 92 dB at 1 W/1 m. The design combines a Carbon Matrix Composite cone with an aluminum tweeter diaphragm.
