Cicada Audio CXK 6x9-Inch 4-Ohm Mid-Bass Component Speaker Kit - CXK69.4

Cicada Audio CXK69.4 CXK 6x9-Inch 4-Ohm Mid-Bass Component Speaker Kit

The Cicada Audio CXK69.4 6 x 9 in motorcycle component speaker kit from the CXK line combines 4-ohm mid-bass and tweeter components with Rain or Shine all-weather construction. Mid-bass power handling is 250W RMS / 500W MAX, while the separate 1 in shallow ring radiator horn tweeter is rated at 50W RMS / 100W MAX. A Carbon Matrix Composite cone, aluminum tweeter dome and external 12 dB crossover at 7 kHz bring premium-material construction to motorcycle listening, with separate drivers addressing mid-bass and high-frequency playback.

Key Features

Rain or Shine Motorcycle Audio

Outdoor listening puts the component system in the elements. Rain or Shine construction is used for both the mid-bass driver and tweeter, giving riders an all-weather design across both sections rather than weather tolerance in only one component.

OFC Shorting Ring and Carbon Matrix Composite Cone

Extending the mid-bass driver's upper-frequency performance starts with an OFC copper shorting ring. The Carbon Matrix Composite (CMC) cone balances low moving mass with strength and heat resistance, supporting efficient output in a motorcycle-focused design.

Black Coat Voice Coil and Vortex Flow Venting

Heat resistance is part of the mid-bass driver's construction beyond the cone. OFC copper voice-coil wire with Black Coat combines conductivity and low resistance with thermal performance, while the custom die-cast aluminum basket incorporates Vortex Flow Venting. An N35SH neodymium motor completes the mid-bass assembly.

Aluminum Dome Horn Tweeter

The aluminum dome brings a brighter character to high-frequency playback while supporting efficiency. Inside the shallow ring radiator horn tweeter, OFC copper voice-coil wire is intended to limit heat generation as it delivers sound. An N35SH neodymium motor and custom die-cast aluminum backplate round out the tweeter's construction.

External Crossover and Field-Replaceable Diaphragm

The tweeter's external crossover uses a custom vented enclosure and a 12 dB slope at 7 kHz. For ongoing upkeep, the tweeter diaphragm is field-replaceable, giving the component system a serviceable high-frequency element.

Features

• Rain or Shine All-Weather Construction
  Weather-tolerant construction extends to both driver types.
• OFC Copper Shorting Ring
  Extends the mid-bass driver's upper-frequency performance.
• Carbon Matrix Composite Cone
  Low-mass, strong and heat-resistant construction supports efficient mid-bass output.
• OFC Copper Voice Coil With Black Coat
  Conductive, low-resistance wire and Black Coat treatment support thermal performance.
• N35SH Neodymium Motors
  Both the mid-bass driver and tweeter use this neodymium motor grade.
• Die-Cast Aluminum Basket With Vortex Flow Venting
  Integrates venting into the mid-bass driver's support structure.
• Aluminum Dome Horn Tweeter
  Designed for brighter high-frequency output and improved efficiency.
• OFC Copper Tweeter Voice Coil
  Designed to limit heat generation while delivering sound.
• External 12 dB Crossover at 7 kHz
  A custom vented enclosure houses the tweeter crossover.
• Field-Replaceable Tweeter Diaphragm
  Supports diaphragm-level service for the high-frequency driver.
• Die-Cast Aluminum Tweeter Backplate
  Adds die-cast aluminum construction to the tweeter assembly.