Cicada Audio CXK 6x9-Inch Mid-Bass Component Speaker Kit - 24CXK69.2
- 6x9-Inch Mid-Bass Component Speaker Kit
- 250W RMS Mid-Bass Power Handling
- All-Weather Design
- 1-Inch Ring Radiator Horn Tweeter
- 12 dB At 7 kHz Crossover
- 2 Ohm Mid-Bass Driver
- 50W RMS Tweeter Power Handling
- Carbon Matrix Composite Cone
- N35SH Neodymium Motors
- Black Finish
Cicada Audio 24CXK69.2 CXK 6x9-Inch Mid-Bass Component Speaker Kit
The Cicada Audio 24CXK69.2 6 x 9 in motorcycle component speaker kit combines a 2-ohm mid-bass driver rated at 250W RMS / 500W MAX with a 4-ohm, 1 in shallow ring radiator horn tweeter rated at 50W RMS / 100W MAX. Both components feature Rain or Shine all-weather design for outdoor motorcycle listening. Built for riders who want to be heard, the kit pairs a lightweight, heat-resistant Carbon Matrix Composite cone with a bright aluminum tweeter dome and an external 12 dB crossover at 7 kHz.
Key Features
Carbon Matrix Composite Cone and OFC Shorting Ring
The mid-bass section balances low cone weight with the strength, heat resistance and efficiency of Carbon Matrix Composite. An OFC copper shorting ring extends the driver's high-frequency performance, giving the mid-bass component reach into the upper part of its operating range as well.
Black Coat Voice Coil and Vortex Flow Venting
The mid-bass assembly addresses heat through its materials and structure: Black Coat OFC copper-wire winding supports conductivity, low resistance and thermal performance, while the custom die-cast aluminum basket incorporates Vortex Flow Venting. N35SH neodymium motors are used in both the mid-bass driver and tweeter.
Aluminum Dome Horn Tweeter
A dedicated shallow ring radiator horn tweeter handles the high-frequency side of your music. Its aluminum dome emphasizes bright, efficient reproduction, while the OFC copper-wire coil helps reduce heat generation. A custom die-cast aluminum backplate completes the assembly, and Rain or Shine construction brings the all-weather design to the tweeter as well as the mid-bass driver.
External Crossover and Field-Replaceable Diaphragm
The external crossover manages the handoff between the mid-bass driver and tweeter, with 12 dB filtering at 7 kHz in a custom vented, enclosed housing. For service, the tweeter's field-replaceable diaphragm allows replacement of that part rather than requiring replacement of the entire tweeter assembly.
Features
- Rain or Shine All-Weather Design
Both component types are built for outdoor motorcycle listening. - OFC Copper Shorting Ring
Extends the mid-bass driver's high-frequency performance. - 250W RMS Mid-Bass With CMC Cone
Lightweight, strong and heat-resistant cone material supports efficient reproduction. - Black Coat OFC Mid-Bass Voice Coil
Copper-wire construction supports conductivity, low resistance and thermal performance. - N35SH Neodymium Motors
Both the mid-bass driver and tweeter use N35SH neodymium motor construction. - Die-Cast Aluminum Basket With Vortex Flow Venting
Combines a custom mid-bass frame with integrated ventilation. - Aluminum Dome Horn Tweeter
Handles 50W RMS / 100W MAX with bright, efficient output. - OFC Copper Tweeter Voice Coil
Helps limit heat generation during playback. - Die-Cast Aluminum Tweeter Backplate
Adds a custom aluminum backplate to the tweeter assembly. - External 12 dB Crossover at 7 kHz
Houses the filtering circuitry in a custom vented enclosure. - Field-Replaceable Diaphragm
Supports tweeter diaphragm replacement in the field.
Related Guides and Articles
Frequently Asked Questions
-
The mid-bass driver handles 250W RMS and 500W maximum at 2 ohms. The tweeter handles 50W RMS and 100W maximum at 4 ohms. These are separate component ratings, not a combined kit power rating.
-
Both the mid-bass driver and tweeter feature a Rain or Shine all-weather design for motorcycle audio and outdoor conditions.
-
The mid-bass driver requires a mounting depth of 3.26 in (83 mm) and a mounting opening of 5.7 x 8.5 in (145 x 216 mm). The tweeter requires a mounting depth of 1.1 in (28 mm) and a mounting diameter of 2 in (50.8 mm). Check these measurements against the available installation space.
-
The mid-bass driver's published frequency response is 70 Hz to 10 kHz, while the tweeter's is 2 kHz to 20 kHz, both within +/- 3 dB. The tweeter uses a custom vented, enclosed external crossover specified at 12 dB at 7 kHz.
-
Both components carry a two-year warranty. Coverage applies to manufacturing defects for the original buyer, starting on the original purchase date, with proof of purchase required. Claims must be submitted through the manufacturer's website form, and written authorization with a valid return authorization is required before returning a product.
