Cicada Audio Larry Frederick Classic 6.5-Inch 2-Ohm Coaxial Horn Speakers (Pair) - CH65.2C

Cicada Audio CH65.2C Larry Frederick Classic 6.5-Inch 2-Ohm Coaxial Horn Speakers (Pair)

The Cicada Audio CH65.2C Larry Frederick Classic 6.5-in coaxial horn motorcycle speakers combine a 2-ohm design, aluminum dome tweeters and an external 12 dB crossover at 4 kHz. Sold as a pair, they target compatible 2014+ H-D factory speaker locations; some models use the included spacer. Published power handling is 250W RMS / 500W MAX, and sensitivity is 96.4 dB at 1W/1m. Lightweight, water-resistant treated paper cones support efficiency and high-temperature resistance, while the aluminum domes bring brighter reproduction to the upper end of your music.

Key Features

Larry Frederick Classic Factory-Location Upgrade

The Larry Frederick Original Classic Design gives riders a coaxial horn option for updating existing 2014+ H-D factory speaker positions. Compatibility depends on the motorcycle, and certain applications call for the supplied 0.5-in spacer. This is a factory-location application, not a universal-fit replacement.

Aluminum Dome Tweeters and External Crossover

The high-frequency driver combines an efficient aluminum dome with a 1.4-in OFC copper tweeter voice coil selected for sound performance with reduced heat generation. A custom-tooled external crossover manages the transition between the mid-bass driver and tweeter, using a 12 dB specification at 4 kHz. The crossover assembly is both encased and vented.

Water-Resistant Treated Paper Cones

Treated paper balances low cone weight with efficiency and resistance to high temperatures. For a motorcycle installation, the scope of its water resistance matters: it describes the cone material, not whole-speaker waterproofing or an IP certification.

Black Coat OFC Copper and Vortex Flow Venting

Black Coat OFC copper voice-coil construction emphasizes high conductivity, low resistance and thermal performance. The driver assembly combines a 2-in mid-bass voice coil with an N35SH neodymium magnet motor. A custom-tooled die-cast aluminum basket incorporates Vortex Flow Venting, completing the construction behind the cone.

Features

• Larry Frederick Original Classic Design
  Brings the Classic design to a pair of 6.5-in, 2-ohm coaxial horn drivers.
• 2014+ H-D Factory-Location Application
  For compatible factory installations, use the supplied 0.5-in spacer where required.
• Aluminum Dome Tweeters
  Adds brightness and efficiency to high-frequency reproduction.
• External 12 dB Crossover at 4 kHz
  Coordinates the drivers' frequency ranges in an encased, vented assembly.
• 1.4-in OFC Copper Tweeter Voice Coils
  Supports tweeter performance while reducing heat generation.
• Water-Resistant Treated Paper Cones
  Keeps cone weight low while resisting high temperatures.
• Black Coat OFC Copper Voice Coil
  Combines conductive, low-resistance wire with thermal performance.
• N35SH Neodymium Magnet Motor
  Uses neodymium in the coaxial horn driver's motor assembly.
• Die-Cast Aluminum Basket With Vortex Flow Venting
  Pairs a custom-tooled aluminum structure with integrated venting.
• 250W RMS / 500W MAX Power Handling
  Helps guide power matching when planning an audio upgrade.
• 96.4 dB Sensitivity at 1W/1m
  Rates output sensitivity using 1 watt at 1 meter.
• 75 Hz-20 kHz Frequency Response
  Covers mid-bass through treble within +/-5 dB.

Footnotes:

Measured performance figures reflect manufacturer testing under specific conditions and may vary with installation, settings and use.