Cuetec AVID Surge 19 Oz Break/Jump Billiard/Pool Cue in Black | Brown Stain - 95-346NW
- 19 Oz Break/Jump Cue
- Glass-Bonded Maple Shaft
- Kintrol Composite Tip With Glass Pad
- Surge Power Pro Taper
- Wrapless Handle
- Acueweight Generation II Weight Adjustment
- 3/8x14 Joint System
- Duo Extension-Ready Bumper
- Quick-Pin Break/Jump Conversion
- Black/Brown Stain Finish
Cuetec 95-346NW AVID Surge 19 Oz Break/Jump Billiard/Pool Cue in Black | Brown Stain
The Cuetec 95-346NW AVID Surge break/jump cue combines glass-bonded maple construction, a low-deflection front end and quick-pin conversion for dual-purpose billiards performance. A Kintrol composite tip with glass pad and Surge Power Pro Taper support its break-and-jump design, while Acueweight Gen II allows cue weight adjustment in 0.25 oz increments. The wrapless Black/Brown Stain finish pairs with Silver and Copper Power Twist Rings for a distinctive look. Built for players who need both functions, this utility cue transitions from breaking the rack to taking on jump shots.
Key Features
Dual-Purpose Break And Jump Performance
Go from opening the rack to clearing an obstructing ball with one utility cue. The 3/8x14 quick-pin forearm joint provides speedy conversion between break and jump configurations, with a dedicated jump handle for the shorter setup.
Glass Composite Bonded Maple
Multiple plies of glass composite are bonded to an A-grade, kiln-dried hard maple core. Each 0.75mm layer runs the length of the shaft and is oriented to increase strength and dynamic stiffness, preserving the feel of wood while adding composite power and durability.
Air Light Front-End Construction
Less front-end mass means less deflection. The glass-composite bonding allows the shaft to be bored out more than 10 in, creating an ultra-rigid cavity with reduced mass. This construction supports accuracy without giving up the strength that break and jump play demand.
Power+ Phenolic Ferrule And Glass Tip Pad
The rock-hard, 7mm Power+ phenolic ferrule protects the impact point, while the oriented-fiber glass tip pad distributes impact forces evenly. Working with the Kintrol composite tip, this assembly supports energy delivery whether you are blasting through the rack or sending the cue ball over an obstacle.
Acueweight Gen II: 0.25 oz Adjustments
Start with a standard 19 oz cue and tailor its balance to your game. A fused butt cap design provides extra cavity space for spacers that shift the balance point without adding weight, and adjustment does not require proprietary tools.
DUO Extension Ready
A DUO-compatible bumper is already installed for use with the DUO Extension set. Compatibility is specific: AVID cues do not work with the original Cuetec Smart Extension.
Features
- Quick-Pin Break/Jump Conversion
Switch configurations using the 3/8x14 forearm joint. - Glass-Bonded Maple Shaft
Oriented 0.75mm composite layers reinforce the wood core for strength and dynamic stiffness. - Surge Power Pro Taper
Brings the Surge shaft profile to both break and jump configurations. - Air Light Front End
A hollowed front section reduces mass to help limit deflection. - 7mm Power+ Phenolic Ferrule
A hard phenolic impact point supports powerful shot delivery. - Kintrol Composite Tip With Glass Pad
Glass backing helps distribute impact forces across the tip assembly. - Acueweight Gen II Adjustment
Tune weight in 0.25 oz steps and use spacers to refine balance. - DUO-Ready Bumper
Accommodates the DUO Extension system. - Wrapless Black/Brown Stain Finish
Keeps the handle free of a wrap for direct contact with the cue. - Silver And Copper Power Twist Rings
Contrasting ring details accent the stained finish. - Steel Collar And Butt Cap
Steel components pair with laser-etched Cuetec and AVID butt cap logos. - CT-Logo Joint Protectors
Protect the joints when the cue is disassembled.
Footnotes:
Shaft Care And Safety: Never sand, polish, abrade or modify the shaft or its diameter. Abrasion can damage the finish and glass composite bonding and release potentially hazardous material. Do not apply powder, hand chalk, talc or other shaft treatments. Avoid excessive bending, lateral pressure and striking other objects.
Cleaning: Use two clean, soft, debris-free cloths and isopropyl alcohol of at least 75%. Remove dust with one cloth, apply alcohol to the other, and wipe lengthwise while rotating around the shaft. Allow the surface to dry; dirt transferring to the cloth is normal.
Tip And Ferrule Service: Use an experienced cuesmith for tip replacement, without sanding or altering the shaft finish. Ferrule replacement must be performed by an authorized Cuetec repair center.
Related Guides and Articles
Frequently Asked Questions
-
Yes. The Acueweight Gen II system allows weight adjustment in 0.25 oz increments.
-
Quick-pin conversion lets you switch from breaking to jumping. The jump handle measures 13 in long and weighs 5.2 oz.
-
The DUO-ready bumper supports DUO compatibility. The original Smart Extension is not compatible.
-
Use two clean, soft, debris-free cloths and isopropyl alcohol of at least 75%. Remove dust with one cloth, then apply alcohol to the other and wipe lengthwise while rotating around the shaft. Let it dry before use. Do not sand, polish or abrade the shaft, or apply powder, hand chalk, talc or other shaft treatments; prohibited treatments void shaft warranty coverage.
-
The limited lifetime warranty covers manufacturing and material defects while the original purchaser owns the cue, including defect-related wood cue or shaft warpage. Purchase from an authorized dealer, proof of purchase and registration within 90 days are required. Coverage is nontransferable and excludes ordinary wear, misuse, improper care or storage, and unauthorized alterations. Start a claim with the selling authorized dealer.