Focal FLAX EVO 6.5" 2-Way Component Kit (Pair) - PS165FSE
Focal PS 165 FSE FLAX EVO 6.5" 2-Way Compnent Kit (Pair)
Equipped with the Flax cone, the woofers from the PS 165 FSE kit deliver a very dynamic, natural sound without colouration. The TMD (Tuned Mass Damper) surround they incorporate stabilises the surround to achieve better control, and even greater neutrality and linearity. Thanks to their built-in neodymium motor, their depth is reduced (slim, shallow basket profile): this more compact design makes them even easier to install in factory locations.
The ‘M’-profile inverted dome TAM tweeters included in the kit offer a wider diffusion angle and greater sound definition, without directionality. Thanks to their tilted mounting, they are easy to install in the vehicle. A compact, pre-cabled audiophile crossover completes this kit. Finally, with its engraved aluminium basket and meticulous finishes, PS 165 FSE combines style, discretion and modernity for a premium system.
Features
- High sensitivity
- Focal last technology
- Wider diffusion angle
- Unique and patented Flax cone (N°1350116)
Specifications
- Nominal power: 60W
- Maximum power: 120W
- Sensitivity (2.83V/1m): 91.5dB
- Cone: Flax
- Surround: TMD - Rubber
- Nom. impedance: 4 Ohms
- DC resistance: 3.3 Ohms
- VC diameter: 32mm
- Former: Kapton
- Layers: 2
- Wire: Copper
- Frequency response: 70-28kHz
- Crossover: 12 dB/Oct @3kHz
Parameters
- Rdc: 2.8Ω
- Fs: 80Hz
- Mms: 16g
- Cms: 0.2mm/N
- Vas: 5l
- Qts: 0.8
- Qes: 0.89
- Qms: 7
- Bxl: 5.4N/A
- Sd: 127cm2
- SPL: 91.5dB
- Xmax: 4mm
General
Approximate Weight
Approximate Dimensions
Similar Products (5 items)
Frequently Asked Questions
-
The frequency response range is from 70 Hz to 28 kHz, allowing for a broad spectrum of sound reproduction from deep bass to crisp highs.
-
This speaker system can handle 60 watts RMS power continuously and up to 120 watts at maximum power, ensuring reliable performance with high power demands.
-
The sensitivity is rated at 91.5 dB, which means the speakers can produce high output sound levels even with lower power input, improving overall efficiency.
-
The impedance is 4 ohms nominal with a DC resistance of 3.3 ohms, matching standard car audio system requirements for optimal compatibility.
-
Yes, these speakers feature a unique patented Flax cone, TMD surround for better control and linearity, and neodymium motor for a slim, easy-to-install profile, as well as 'M'-profile inverted dome tweeters that provide a wider diffusion angle with enhanced sound definition.