Hertz Mille Series Component Car Audio Tweeter - ML280.3
- 180 Watts Peak Power Handling
- 4 Ohm Impedance
- Neodymium Magnet
- Extremely Pure Copper Short Circuit Ring
- Die-Cast Aluminium Face Plate With Profile
- Tetolon Fiber Dome
- Black Finish
Hertz Mille Series Component Car Audio Tweeter - ML2803
To improve a tweeter which was considered a reference since its first introduction into the market is a quite challenging task which could only be performed by a continued evolution in time and maximum care for each detail that might affect sound. From these presuppositions ML 280.3 Legend has been born. Through the FEA simulations, the electro-acoustic designers carried out an extensive research which led to the optimization of the Tetolon dome geometry, to minimize distortion. This optimization method led to a reviewed faceplate geometry for improved frequency response and lower distortion. Another element of the tweeter especially important for sound is the rear acoustic chamber: the designers performed an exhaustive research on the geometry as well as on the employed damping material, achieving 50% increase in overall volume, to extend response to lower frequencies with 900Hz resonance frequency.
Features:
- Neodymium magnet optimized with FEA simulations of the magnetic flux for utmost control and fast response to the transients
- Extremely pure copper short circuit ring, for excellent very high frequency extension
- Die-cast aluminium face plate with profile optimized with FEA simulations to improve frequency response and dispersion
- Tetolon Fiber dome optimized with FEA simulations for lower distortion and improved dispersion in high frequency range
- Frame structure and rear load chamber both derived from a CNC machined solid aluminium block, to ensure mechanically inert response to resonances
- Rear chamber sized for only 900 Hz Fs: low Fs ensures wide extension in low frequency range and low distortion also in the crossing section, allowing a decreased cut-off frequency
- High-density damping material underneath the dome, low-density absorbing
material in the rear chamber, providing fluid acoustic emission and high damping
in the low frequency response
Specifications:
- Component: Tweeter
- Size mm (in.): 35 (1.38)
- Power Handling - Peak W: 180 (Hi-Pass filtered @ 1,8kHz - 12dB Oct.)
- Impedance Ohm: 4
- Frequency response Hz: 1k - 28k
- Sensitivity dB SPL: 92
- Voice coil Ø mm (in.): 28 (1.1)
- Magnet: Neodymium
- Cone/Dome: Tetolon
Approximate Weight:
- Shipping: 1 lbs
Manual
Similar Products (3 items)
Related Guides and Articles
Frequently Asked Questions
-
The peak power handling capacity is 180 Watts, which allows the tweeter to handle high power levels without distortion, delivering clear and crisp sound at higher volumes.
-
The impedance rating is 4 Ohms. This rating ensures compatibility with most car audio systems, allowing efficient power transfer and optimal sound performance.
-
The tweeter features a neodymium magnet for strong magnetic performance, an extremely pure copper short circuit ring for reduced distortion, a tetolon fiber dome for accurate sound reproduction, and a die-cast aluminum face plate with profile for durability and design.
-
The unit weighs approximately 1 pound. The product box measures 10 inches in depth and 5 inches in width, making the tweeter compact and easy to install in various locations.
-
The product was released on December 16, 2014. It has since established a reputation for high-quality sound in car audio applications.
