JL Audio Evolution C2 Component Speaker System (Pair) - 010-03125-00

JL Audio 99620 Evolution C2 Series 5.25" Component Speaker System (Pair)

2-Way Component System: 5.25-inch (130 mm) Woofer, 0.75-inch (19 mm) Silk Dome Tweeter

The Evolution C2 systems deliver sparkling high-frequency detail, smooth mid-range and powerful mid-bass, thanks to real silk dome tweeters and long linear excursion woofer designs.

The C2-525 system features 5.25-inch (130 mm) component woofers with mineral-filled polypropylene cones, long excursion capabilities and stamped steel frames. The woofer design benefits from JL Audio's vast woofer design experience and advanced modeling systems.

The C2 component tweeters are built with 0.75-inch silk dome diaphragms that deliver smooth, extended response, on and off axis. Flush-mounting and surface-mounting fixtures are included to fit a wide variety of installation needs.

C2 crossover networks are compact and built with premium component parts, including Mylar® capacitors and segmented air-core inductors. Three levels of tweeter attenuation are provided, as well as a tweeter protector.

Woofer grilles are included, each consisting of a black grille tray with satin silver accents and a black steel mesh grille with an electroformed JL Audio logo.

Sold as a pair.

Features:

• Woofer Technology
  The C3 woofers are 100% new designs aimed at raising the bar for midbass performance, dynamic stability and fidelity of response.
• Tweeter Technology
  The C3 tweeter is a true, edge-driven 1-inch (25mm) silk dome that excels on or off axis and offers very smooth and flat frequency response to well beyond 20 kHz.
• Crossover Technology
  Getting your C3's dialed in couldn't be simpler thanks to their sophisticated 2-way crossover networks.
• Coaxial? Component? You decide.
  C3 Convertible Components give you the option of installing the speakers as separate component speaker systems or as coaxial systems.
• Description
  Evolution® C3 5.25 in. / 130 mm Convertible Component System: 5.25 in. / 130 mm Woofers; 1.00 in. / 25 mm Silk Dome Tweeters Grilles Included
• Woofers
  Injection-Molded Polymer Frame, Patented Elevated Frame Cooling (U.S. Patent #6,219,431 & #6,229,902), DMA-Optimized Motor System, Mineral-Filled Polypropylene Cone, Rubber Surround, 1-in. / 25 mm Voice Coil, Kapton® Former, Low-Profile, Symmetrical Roll Spider, Ferrite Magnet
• Tweeters
  1.00 in. / 25 mm Silk Soft Dome with Ferrofluid Cooling and Damping and Neodymium Magnet Fixed Angle Flush-Mount, Surface-Mount and Coaxial-Mount Systems
• Crossover Networks
  2-way networks with 1st order low-pass and 2nd order high-pass filters, premium Mylar® capacitors, air-core inductors, 4-position adjustable tweeter output level, 3-position midrange presence control, Polyswitch tweeter protection

Specifications:

General

• Continuous Power Handling (RMS): 60 W
• Recommended Amplifier Power (RMS): 15 - 100 W / Ch.
• System Efficiency: 89.0 dB @ 1 W / 1 m
• System Nominal Impedance: 4 Ω
• System Frequency Response: 63 Hz - 22 KHz ± 3 dB

Woofer

• Frame Outer Diameter*: 5.20 in / 132 mm
• Grille Tray Outer Diameter: 6.01 in / 153 mm
• Motor Outer Diameter: 2.76 in / 70 mm
• Frontal Coaxial Tweeter Protrusion: N/A
• Frontal Grille Protrusion**: 0.72 in / 18 mm
• Mounting Hole Diameter: 4.56 in / 116 mm
• Mounting Depth: 2.50 in / 64 mm

Tweeter

• Flush Mount Fixture Diameter: 1.87 in / 48 mm
• Surface Mount Fixture Diameter: 1.69 in / 43 mm
• Flush Mount Mounting Hole Diameter: 1.625 in / 41 mm
• Flush Mount Fixture Mounting Depth: 0.76 in / 19 mm
• Flush Mount Tweeter Frontal Protrusion: 0.29 in / 7 mm
• Surface Mount Tweeter Frontal Protrusion: 0.92 in / 23 mm

Crossover

• Height: 1.44 in / 37 mm
• Width: 3.36 in / 85 mm
• Depth: 4.72 in / 120 mm

Footnotes:

• *Does not take into account mounting tabs
• **Frontal grille protrusion measured from mounting surface