Main Content
MartinLogan Neolith 15" Rosso Fuoco 3-Way Floor Standing Right Speaker (Each) - NEORFDR
Shop MartinLogan
Abt Model: NEOSBDRRF
Special Order
Your Price: $59,999.99
-
$5,000/mo suggested payments with 12 month special financing.Get a decision in seconds with no impact to your credit bureau score.or -
See other products in Floor Standing Speakers or MartinLogan
MartinLogan Neolith 15" NEOSBDRRF Rosso Fuoco 3-Way Floor Standing Right Speaker (Each)
Features
- Truth in Sound, Embodied
For those who appreciate accuracy and realism in their audio, the electrostatic transducer is the grail. For those who understand this truth in sound, we created a flagship loudspeaker: Neolith. Made-to-order, hand-delivered and professionally installed; in a world of same, Neolith proclaims different. In a world of artifice, Neolith delivers truth in sound - Unconstrained
Neolith is not for the faint of heart. As the embodiment of our philosophy of the truth in sound, its performance is unconstrained. It goes against the grain. In a world of small, Neolith says size is no impediment - Uninhibited
Neolith features one of MartinLogan's largest electrostatic radiating surfaces, Fully 35% larger than the Statement E2. Its proprietary curvilinear electrostatic transducer delivers an ideal wave launch; a detailed, ultrarealistic soundstage, reproducing nearly the entire mid-range and high frequency audio spectrum. It is utterly uninhibited by room limitations - Visceral
Smoothly blended low-frequencies are provided by a 15-inch rear-firing ported woofer and 12-inch front-firing sealed mid-bass woofer. Combined, they deliver powerful, extremely accurate bass - Detailed
And this is just the beginning. The details demand your attention. The exclusive advanced-topology Vojtko Crossover uses hand-selected components for optimum power handling. The passive Neolith design gives you more control, allowing single-wire or bi-amp connections with silver filigree WBT Binding Posts, plus a unique system of audio adjustment jumpers. The audaciously sculpted Neolith frame is made of non-resonant Phenolic Resin Polymer, smoothly finished in a premium automotive gloss. Its hand-crafted woofer cabinet is wrapped in elegant soft leather - Breathtaking
Prepare yourself for an astonishing new audio experience; a bigger, bolder, no-holds-barred experience of breathtakingly articulate performance. The bespoke Neolith is the culmination of over 30 years of MartinLogan passion, engineering innovation and dedication to the ultimate truth in sound - Electrostatic Truth
MartinLogan didn't invent electrostatic transducer technology. But by eliminating the perceived deficiencies of electrostatic technology, such as poor power handling, lack of bass response and narrow soundstage (beaming), MartinLogan has reinforced the benefit of electrostatic technology: uncanny audio accuracy- Parts of an Electrostatic Transducer
An electrostatic transducer has three components—stators, a diaphragm, and spars (non-conductive spacers that keep the tall assembly stationary)—assembled as a sandwich. The diaphragm is an ultra-light film impregnated with an electrically conductive material and stretched taut between two stators, which are perforated steel sheets coated with an insulator - Electrostatic Forces at Work
When the speaker is operating, the diaphragm is charged with an electrostatic field of fixed positive voltage. The two stators, between which the diaphragm is stretched, are charged with voltages of equal strength but opposite polarity. These charges occur in instantaneously alternating pulses according the signal received from your audio equipment. When the charge on one stator is positive, the charge on the other is negative. Because like charges repel and opposite charges attract, the diaphragm's constantly positive charge will force it to move forward or backward depending on the stator charges. With this movement, an electrostatic transducer translates an electrical audio signal into the diaphragm motion that produces sound waves in your room - Additional Information
- Because traditional cone loudspeakers produce sound in response to the separate movements of many small parts (voice coil, former, diaphragm), they can't help but suffer distortion-inducing time lag as the signal travels through these parts and across the cone. But an electrostatic transducer has only one moving part: the diaphragm. Its movement is instantaneous, with no time lag, enabling the diaphragm to trace even the most delicate sonic details with absolute precision. The diaphragm's surface area is much larger than any cone driver, giving the electrostatic transducer the ability to perform over an exceptionally wide frequency range without having to cross over to another driver. MartinLogan engineers have improved these basic electrostatic technologies with their unique innovations. The components of each MartinLogan electrostatic panel are fused in our proprietary Vacuum Bonding process using an aerospace adhesive whose hold-strength exceeds that of welding. Vacuum Bonding ensures uniform diaphragm tensioning, and facilitates the extremely tight tolerances necessary for the construction of such a precision transducer. The stators that "sandwich" the diaphragm must be rigid enough to remain absolutely stationary despite the strong electrostatic forces pushing and pulling them during operation. They must also be perforated to allow sound to pass through. MartinLogan's MicroPerf design optimizes this tradeoff by reducing the size of the individual stator holes, increasing the effective radiating area of the diaphragm without compromising the structural integrity of the panel. MartinLogan's ClearSpar spacers strengthen the assembly across its width, ensuring the consistent tension of the Vacuum Bonded diaphragm between the stators with absolutely no visual or auditory obstructions
- MartinLogan's groundbreaking Curvilinear Line Source (CLS) electrostatic panel design is an elegant solution to the impression of sound "beaming" from an electrostatic panel. MartinLogan CLS electrostatic panels feature a gentle horizontal curve. This ingeniously simple innovation radically changes the speaker's dispersion pattern, radiating a wide, enveloping soundstage, packed with detail; truly unlike any other loudspeaker experience. Another key attribute of an electrostatic speaker is its dipolar radiation pattern. A true dipole transducer radiates with equal intensity from the front and back of its diaphragm, with the outputs in opposite phase. As a result, sound waves rippling out toward the sides meet at the speaker's edge and cancel, minimizing side-wall reflections with short relative arrival times. This reduction in side-output minimizes interfering side-wall reflections, which can muddy the image. It frees the dipole radiation pattern to produce a generous amount of ambience-enriching late-arriving reflections off the wall behind your loudspeakers. At the same time, electrostatic panels maintain relatively limited vertical dispersion, which minimizes undesirable floor and ceiling reflections. Neolith is the apogee of electrostatic performance, combining these innovations in a new design. By delivering an undiluted soundstage with excellent separation, Neolith brings your music and movie soundtracks to startlingly accurate, 3-dimensional life
- Parts of an Electrostatic Transducer
California customers:
General
Bluetooth
No
Wi-Fi
No
USB Port
No
NFC
No
Water Resistant
No
Rock Speaker
No
Number of Speakers In Set
1
Waterproof
No
AirPlay
No
Built-In Mic
No
Digital Display
No
Aux Input
No
Crossover Frequency
60Hz, 250-400Hz
Recommended Amplifier Power
50W - 1300W
App Controlled
No
Power Consumption
10W Each
Power Consumption (Standby)
1W Each
Optical Digital Input
No
Rechargeable
No
SonosNet
No
Microphone Mute
No
Coaxial Digital Input
No
HDMI Input
No
HDMI Audio Return Channel (ARC)
No
4K Video Passthrough
No
8K Video Passthrough
No
Remote Control Included
No
Wireless Subwoofer
No
Input(s)
1 x Binding Posts
HDR Support
No
Tweeter Size (in)
48 x 22
Tweeter(s)
1 x 48" x 22" CLS XStat electrostatic
Woofer Size (in)
15, 12
Woofer(s)
1 x 15" cast basket, high excursion, rigid aluminum cone with extended throw drive assembly. Extensively vented triple shorting ring motor and 4-layer coil to eliminate compression and distortion, 1 x 12" round cast aluminum alloy frame, high excursion, rigid carbon fiber sandwich cone with long throw design, 3-inch (7.5cm) diameter copper-clad aluminum flat wire voice coil, and vented pole piece and under-spider opening to reduce power compression
Wireless Multi-Room Audio
No
Center Speaker
No
Side-Firing Speaker
No
Up-Firing Speaker
No
Dolby Atmos
No
DTS: X
No
Connectivity
Binding Posts
Frequency Response
23Hz - 22,000Hz (+/-3db)
Powered / Passive
Passive
Enclosure Material
Phenolic Resin Polymer
Enclosure Type
Phenolic Resin Polymer: Dense substrate with superb mechanical strength minimizes cabinet vibrations caused by woofer cone motion counter forces to provide an ideal baffle for the electrostatic panel and woofers
Impedance
4 Ohms
Sensitivity
90 dB/2.83 volts/meter
Speaker Design
2-Way
Speaker Type
Floor Standing
Approximate Weight
Unit Weight (lbs.)
385
Shipping Weight (lbs.)
600
Warranty Information
Parts Warranty
5 Years Limited
Labor Warranty
5 Years Limited
Approximate Dimensions
Height (in)
74.8
Width (in)
30.3
Depth (in)
34.2
Guides
Brochure
Key Features
- Sold As Each
- 50-1300 Watts Per Channel At 4 Ohms Recommended Amplifier Power
- 15" Rear Cast Basket, High Excursion, Rigid Aluminum Cone With Extended Throw Drive Assembly
- 12" Front Round Cast Aluminum Alloy Frame, High Excursion, Rigid Carbon Fiber Sandwich Cone With Long Throw Design
- 3" Diameter Copper-Clad Aluminum Flat Wire Voice Coil, And Vented Pole Piece And Under-Spider Opening
- Curvilinear Line Source (CLS) Electrostatic Panel Design
- WBT-0705Ag Nextgen 5-Way Bi-Wire Binding Posts
- Right Speaker
- Rosso Fuoco Finish
Guides
Over 87 Years Of Experience
What Our Customers Say About Us
Item arrived on time, works great. Very pleased with the whole transaction.
Tim G.
- Mccleary, WA
May 15, 2023
Answered my call promptly and helped with all my questions. Order was delivered on time and we are very happy with our new microwave. Definitely would order from ABT again!
Marcy M.
- Plymouth, MN
May 16, 2023
Abt.com was easy to navigate and always our go-to when looking for appliances. Shipping and delivery was quick, efficient and awesome!
Kelly S.
- Indian Wells, CA
May 16, 2023
The ABT Team, They came, delivered, setup & remove the old unit & box and were very Proffesional, Courteous & fast. I look forward to doing more business with ABT. Thank You...
Leo D.
- Chicago, IL
May 11, 2023
Excellent service. The follow up and being on time was perfect. The install went well
Daniel A.
- Miami, IL
May 19, 2023
I have shopped with ABT for years. Their website is top notch and prices with free shipping is always a big plus.
Mary W.
- Hudson, FL
May 11, 2023
Delivery was great. Communication was excellent and the driver called 10 minutes before arrival.
Sonia L.
- Chicago, IL
May 11, 2023
Great service! My shipment arrived right on time. Our delivery agent was fantastic. I would give ABT more stars if I could!
Theresa W.
- Summerville, SC
May 16, 2023
Excellent very thorough and extremely polite gentleman to install my new washer!!
Aleka/dennis N.
- Niles, IL
May 16, 2023
