Metra Select Chevrolet/GMC Vehicles 2019-2020 Radio Installation Kit - AXPIO-SIL2

Metra AXPIO-SIL2 Select Chevrolet/GMC Vehicles 2019-2020 Radio Installation Kit

The new AXPIO-SIL2 is a fully integrated dash kit package designed specifically for select Pioneer® receivers*. This complete solution features an AXPIO Series interface, vehicle-specific harnessing, a dash kit, and more. Vehicle information and settings controlled on the factory screen are retained, displayed, and controlled on the Pioneer® touchscreen. These settings would otherwise be lost after replacing the head unit. The built-in integration technology from Axxess also retains safety chimes through an offboard speaker, retains audio controls on the steering wheel, retains R.A.P. (Retained Accessory Power), and provides accessory power (12-volt-10-amp) and NAV output for parking brake, reverse, and speed sense.

*Refer to radio manufacturer for most current models

Features

• Designed for non-amplified vehicles
• Designed for Pioneer® DMH-WC5700NEX receivers
• Refer to radio manufacturer for most current models.
• Allows for the retention and adjustment of the factory personalization menu through the Pioneer® radio
• Provides a visual view of HVAC and gauges on the Pioneer® screen (cannot be adjusted via the screen)
• This package includes a dash kit, interface with plug-n-play harnessing, antenna adaptor, 3’ USB/AUX/HDMI® replacement cable with panel.
• Provides accessory power (12V 10-amp)
• Provides NAV outputs (parking brake, reverse, and speed sense)
• Retains audio controls on the steering wheel
• Works in both single and dual-zone vehicles
• Retains safety chimes through an included off-board speaker
• Micro “B” USB updatable
• Dash kit is painted scratch-resistant matte black to match the factory finish

Applications

• Chevrolet
  • Silverado 1500 (excluding WT Trim) 2019
  • Silverado 1500/2500/3500 (excluding WT Trim)¹ 2019-2020
• GMC
  • Sierra 1500¹ 2019
  • Sierra 1500/2500/3500 2019-2020

Footnotes:

• ¹ Models with a 2 knob 8-inch screen radio, RPO code IOS or IOT. The RPO code can be found in the Vehicle Certification label located on the inside of the driver’s door opening. A mobile device with a QR scanner must be used to decipher the code.