Polk Audio Vanishing Series 6.5-Inch In-Wall Speaker in White (Each) - AW4065
- Sold As Each
- 6.5-Inch Dynamic Balance Polypropylene Woofer
- 10W-125W Recommended Amplifier Power
- 8 Ohms Nominal Impedance
- 90dB (1W/1m) Sensitivity
- 1-Inch Swivel Silk-Dome Tweeter
- Paintable Wafer-Thin Sheer Grille
- White Finish
Polk Audio AW4065 Vanishing Series 6.5-Inch In-Wall Speaker in White (Each)
The Polk Audio AW4065 Vanishing Series in-wall speaker combines a 6.5 in Dynamic Balance polypropylene woofer, a 1 in swivel-mount silk-dome tweeter and a paintable, wafer-thin Sheer Grille. Built for vertical installation, this single speaker has an 8-ohm nominal impedance and a recommended amplifier power range of 10 to 125 watts per channel. Klippel Distortion Optimization supports consistent playback at different listening levels, while the included white grille lets you coordinate the finished appearance with your room.
Key Features
Dynamic Balance Woofer and Swivel-Mount Tweeter
The lightweight polypropylene cone brings midrange definition, punchy bass and efficiency to built-in listening. The 6.5 in mid/woofer pairs that cone with a butyl rubber surround. A separate 1 in silk-dome tweeter uses a swivel mount, providing an adjustable tweeter position rather than a fixed mounting arrangement.
Paintable, Wafer-Thin Sheer Grille
Coordinate the visible grille with your wall finish instead of limiting your room's palette to the supplied white. The included Sheer Grille combines a wafer-thin profile with a paintable surface, making color selection part of your built-in audio installation plan.
Klippel Distortion Optimization
Klippel optimization addresses the motor structure, voice-coil alignment and suspension together. That attention to the driver's working parts supports consistent performance as you turn the volume up or down, helping preserve the listening experience across different playback levels.
Dolby Atmos and DTS:X System Integration
Use this in-wall design as part of a Dolby Atmos or DTS:X installation. For system planning, Polk Audio recommends pairing it with Signature Elite, Signature, Monitor XT and T Series speakers, giving you specific speaker families to consider when coordinating your home theater.
8-Ohm Amplifier Matching and Acoustic Specifications
Match your amplifier using the 8-ohm nominal impedance and recommended amplifier power of 10 to 125 watts per channel. That range is amplifier-selection guidance, not a built-in amplifier rating. Speaker wiring connects through a pair of gold-plated push connectors.
For sound comparisons, distinguish the total frequency response of 32 Hz to 27,000 Hz from the separate -3 dB limits of 50 Hz to 25,000 Hz. Sensitivity is specified as 90 dB at 1 watt measured at 1 meter, giving you the measurement basis alongside the output figure.
Vertical Installation and Optional Pre-Construction Bracket
Plan for vertical in-wall mounting and a published flush mounting depth of 2.875 in. Each package contains one speaker and one paintable grille, not a pair of speakers. For projects using a pre-construction bracket, PB LC65i is the listed optional accessory and is sold separately.
Features
- 6.5 in Dynamic Balance Woofer
Polypropylene cone construction balances midrange clarity, bass impact and efficiency. - 1 in Swivel-Mount Silk-Dome Tweeter
Swivel mounting allows tweeter-position adjustment during setup. - Paintable Wafer-Thin Sheer Grille
A white, paint-ready grille is included with the speaker. - Klippel Distortion Optimization
Coordinated driver optimization supports playback across listening levels. - Dolby Atmos and DTS:X Applications
Integrate built-in speakers into an immersive home theater installation. - Recommended Speaker-Series Pairings
Coordinate with Signature Elite, Signature, Monitor XT or T Series speakers. - 8-Ohm Nominal Impedance
Recommended amplifier power spans 10 to 125 watts per channel. - 32 Hz to 27,000 Hz Total Frequency Response
Separate -3 dB limits are 50 Hz to 25,000 Hz; sensitivity is 90 dB at 1 watt/1 meter. - Gold-Plated Push Connectors
Connect speaker wiring through one pair of push terminals. - Sold Individually for Vertical In-Wall Installation
Each package supplies one speaker and one grille. - Optional PB LC65i Pre-Construction Bracket
The compatible bracket is sold separately and is not included. - Engineered and Designed in Baltimore, Maryland
Development emphasizes Polk Audio's standards for quality, reliability and performance.
Footnotes:
Performance figures come from manufacturer testing under specific conditions and vary with the home, settings and use.
Related Guides and Articles
Frequently Asked Questions
-
The recommended amplifier power is 10 to 125 watts per channel, with a nominal impedance of 8 ohms. This range is for matching an external amplifier, not a built-in amplifier rating.
-
The published flush mounting depth is 2.875 in, while the overall speaker depth is 3.375 in. Vertical installation is the listed orientation.
-
Yes. The included white, wafer-thin Sheer Grille is paintable, allowing you to coordinate its finish with your walls.
-
Yes. The manufacturer lists Dolby Atmos and DTS:X installations as intended applications. Recommended speaker-series pairings include Signature Elite, Signature, Monitor XT, and T Series.
-
No. The PB LC65i pre-construction bracket is an optional accessory sold separately. A white, paintable, wafer-thin Sheer Grille is included.