Rockford Fosgate Prime 4 x 6-Inch 2-Way Coaxial Speakers (Pair) - R1V2-46
- Sold As Pair
- 50 Watts RMS / 100 Watts Peak Power Handling
- Nitrile Butyl Rubber Half-Roll Surround
- Kapton Voice Coil Former
- 4 Ohms Nominal Impedance
- Removable Motor Cover
- Grilles Not Included
- Black Finish
Rockford Fosgate R1V2-46 Prime 4 x 6-Inch 2-Way Coaxial Speakers (Pair)
The Rockford Fosgate R1V2-46 Prime 4x6 in 2-way coaxial car speakers combine 4-ohm impedance, 50 watts RMS and 100 watts peak power handling, and phase-aligned tweeters in a pair built to upgrade factory audio. Each speaker integrates its crossover into the basket and uses a ferrofluid-cooled PET balanced-dome tweeter for detailed highs. Low-profile construction supports space-constrained dash or door installations, bringing clearer vocals and balanced musical detail to everyday driving without separate woofer and tweeter components.
Key Features
Focused Fit for Factory Locations
A stamped-steel basket provides a rigid foundation, while vehicle-oriented attachment points support installation in factory speaker locations. The open, low-profile frame improves ventilation and suits shallow dash or door spaces. A cutout template, screws and M4 speed clips are included to help with mounting.
Clear, Focused Sound With Coherent-Phase Alignment
The point-source tweeter sits within the woofer's voice-coil geometry to help both drivers' output reach you together. That alignment reduces phase cancellation for more precise stereo imaging and intelligible vocals. A dispersion ring spreads treble detail more evenly to listeners seated on or off the speaker's axis.
Built-In Simplicity With an Integrated Crossover
There is no separate crossover box to mount or hide when replacing your original speakers. The integrated components coordinate the woofer and tweeter within the same assembly, keeping installation uncluttered. A 6 dB/octave tweeter network with a 100-volt capacitor supports phase integrity and reliable operation.
50 Watts RMS for Durable Everyday Output
The shared Prime power rating simplifies amplifier selection, and 4-ohm impedance supports factory and aftermarket systems. A 30% mica-filled polypropylene cone provides controlled midrange and mid-bass, paired with a flexible Nitrile Butyl rubber surround. A copper voice coil and heat-stable Kapton former help manage the demands of daily playback.
Overhung Motor Geometry for Controlled Playback
Keeping the voice-coil windings in a consistent magnetic environment helps control distortion when playback becomes demanding. A poly-cotton spider guides accurate cone movement, while the Y30 ferrite magnet supports efficient output. FEMM-based T-yoke optimization concentrates magnetic energy where the voice coil operates, helping maintain linear response through normal excursion.
Engineered and Verified for Consistency
COMSOL modeling evaluates structural strength, heat flow and electromagnetic behavior, with Fourier analysis separating bass, midrange and treble output for evaluation. Klippel verification checks mechanical and acoustic consistency, and the power-handling rating follows CTA-2031 standards. Components also undergo ISO 60068-2-64 vibration testing for resistance to shock and vibration.
Features
- Stamped-Steel Basket
Rigid construction supports mounting in factory speaker locations. - Low-Profile Open Frame
Ventilated construction accommodates shallow dash or door installations. - Speaker Pair With Mounting Hardware
Includes two speakers, a cutout template, eight screws and eight M4 speed clips. - Coherent-Phase Alignment
Coordinated driver output helps keep vocals focused and stereo placement precise. - 3/4 in PET Balanced-Dome Tweeter
A ferrofluid-cooled tweeter reproduces high-frequency detail. - Tweeter Dispersion Ring
Broader treble coverage reaches on-axis and off-axis listeners. - Integrated Concealed Crossover
Keeps crossover components inside the basket instead of in a separate enclosure. - 6 dB/Octave Tweeter Network
A 100-volt capacitor supports dependable high-frequency operation. - 50 Watts RMS / 100 Watts Peak
The common Prime RMS rating makes amplifier selection more straightforward. - 4-Ohm Nominal Impedance
Works with compatible factory and aftermarket audio systems. - 30% Mica-Filled Polypropylene Cone
Delivers clean, controlled midrange and mid-bass reproduction. - Half-Roll Nitrile Butyl Rubber Surround
Maintains flexibility and mechanical integrity through regular use. - 1 in Copper Voice Coil
Promotes heat dissipation for reliable power handling. - Kapton Voice-Coil Former
Adds strength and thermal stability to the voice-coil assembly. - Nickel-Plated Copper Terminals
Corrosion-resistant contacts provide durable electrical connections. - Overhung Motor Geometry
Helps preserve controlled cone travel as listening demands increase. - Poly-Cotton Spider
Stabilizes cone movement to help reduce distortion. - Y30 Ferrite Magnet
Supports magnetic energy and efficient conversion to acoustic output. - FEMM-Optimized T-Yoke
Focuses magnetic flux in the voice-coil gap for controlled response. - COMSOL Modeling
Evaluates structural, thermal and electromagnetic behavior during development. - CTA-2031-Compliant Power Handling
Uses an industry-standard basis for the published power rating. - Verified With Klippel
Tests for repeatable mechanical and acoustic performance. - Vibration-Resistant Components
ISO 60068-2-64 testing addresses resistance to shock and vibration.
Footnotes:
Published performance figures reflect manufacturer testing under specific conditions and may vary with the vehicle, audio-system settings and use.
Grilles and trim rings are not included.
Related Guides and Articles
Frequently Asked Questions
-
The nominal speaker size is 4x6 in. Installation requires a cutout measuring 5.62 in x 3.66 in, a mounting depth of 1.67 in and front-side clearance of 0.23 in. The low-profile construction is intended for space-constrained factory dash and door locations; compare these measurements with the available installation space before purchasing.
-
Power handling is rated at 50 watts RMS and 100 watts peak, with a nominal impedance of 4 ohms. The published power handling conforms to CTA-2031 industry standards. The 4-ohm design is described as compatible with factory and aftermarket audio systems.
-
Mounting hardware is included: eight #8 Phillips self-tapping screws, each 0.75 in long, and eight M4 speed clips. A speaker cutout template is also listed. Grilles and trim rings are not included, and speaker wire is not listed among the included contents.
-
No. The crossover components are integrated into the speaker basket, so there is no separate external crossover enclosure to mount. The built-in tweeter high-pass crossover helps coordinate woofer and tweeter output.
-
The recessed, phase-aligned tweeter arrangement is designed to coordinate the arrival of woofer and tweeter output, supporting clearer vocals and improved stereo imaging. A dispersion ring broadens high-frequency coverage for listeners in different seating positions. The published frequency response is 82 Hz to 20 kHz.