Rockford Fosgate Prime 5.25-Inch 2-Way Coaxial Speakers (Pair) - R1V2-5
- Sold As Pair
- 5.25-Inch Coaxial Speaker
- 50 Watts RMS / 100 Watts PEAK Power Handling
- Half-Roll Nitrile Butyl Rubber Surround
- Kapton Voice Coil Former
- 4 Ohms Nominal Impedance
- Grilles Sold Separately
- Black Finish
Rockford Fosgate R1V2-5 Prime 5.25-Inch 2-Way Coaxial Speakers (Pair)
The Rockford Fosgate R1V2-5 Prime 5.25 in 2-way coaxial car speakers combine 4-ohm impedance with 50 watts RMS and 100 watts peak power handling for an everyday factory-audio upgrade. A 75 Hz - 20 kHz frequency response, ferrofluid-cooled PET balanced-dome tweeters and an Integrated Concealed Crossover (ICC) bring voices, midbass and musical detail together in an all-in-one design. Sold as a pair, these speakers use low-profile stamped-steel baskets and built-in crossover components to simplify installation in factory speaker locations.
Key Features
Focused Fit For Factory Speaker Locations
Low-profile open-frame baskets support shallow installations while allowing ventilation around the speakers. Stamped steel supplies a rigid foundation, and vehicle-oriented mounting points help position the speakers in factory locations. Screws, speed clips and a cutout template are included to help with installation.
COMSOL Multiphysics Design Analysis
COMSOL Multiphysics analysis examines structural strength, heat flow and electromagnetic behavior together. Fourier analysis separates acoustic output into frequency components, allowing bass, midrange and treble behavior to be examined as part of the speaker design process.
Overhung Motor Geometry For Controlled Output
The overhung voice-coil geometry maintains a consistent magnetic environment through normal speaker excursion, supporting linear output and distortion control. A poly-cotton spider steadies cone travel, while the Y30 ferrite motor and FEMM-optimized T-yoke concentrate magnetic energy in the voice-coil gap for controlled musical reproduction.
Coherent-Phase Alignment For Clearer Vocals
Recessing the tweeter within the woofer geometry helps align sound from both drivers as it reaches the listener. Reducing cancellation supports vocal clarity and stereo imaging, so the drivers work together rather than competing. The 3/4 in ferrofluid-cooled PET balanced-dome tweeter handles the high-frequency detail.
Tweeter Dispersion Ring For Wider Coverage
The shaped transition around the point-source tweeter spreads high-frequency energy more evenly across the cabin. That broader dispersion helps preserve detail and imaging for listeners sitting directly in line with the speaker as well as those listening off-axis.
ICC Crossover: Built-In Simplicity
The woofer and tweeter share a speaker assembly with crossover components concealed inside its basket. There is no separate crossover enclosure to mount or hide, keeping the installation cleaner. A 6 dB/octave, 100-volt capacitor tweeter network supports phase behavior and reliable operation.
Durable Everyday Output With 50 Watts RMS Handling
A 30% mica-filled polypropylene cone delivers controlled midrange and midbass, while a half-roll nitrile butyl rubber surround maintains flexibility. The 1 in copper voice coil dissipates heat, and its Kapton former adds strength and thermal stability. Rated for 50 watts RMS and 100 watts peak, the speakers are built for daily listening. Klippel testing checks mechanical and acoustic consistency, and vibration-resistant construction addresses vehicle-related shock and vibration.
Features
- Focused Fit Stamped-Steel Baskets
Rigid baskets and vehicle-oriented mounting points support installation in factory speaker locations. - Low-Profile Open-Frame Construction
Shallow installation capability is paired with ventilation around the speaker assembly. - COMSOL Multiphysics
Design analysis examines structural, thermal, electromagnetic and acoustic behavior. - Overhung Motor Geometry And Poly-Cotton Spider
Coil geometry and a stable suspension help control cone travel and distortion. - Y30 Ferrite Motor And FEMM-Optimized T-Yoke
Concentrated magnetic flux supports efficient, controlled output. - Coherent-Phase Alignment
Recessed tweeter placement reduces cancellation for clearer voices and improved imaging. - 3/4 in Ferrofluid-Cooled PET Tweeter
A balanced-dome design reproduces detailed highs. - Tweeter Dispersion Ring
Broader treble coverage serves both on-axis and off-axis listeners. - ICC Crossover
Basket-mounted crossover components eliminate a separate enclosure to install. - 6 dB/Octave, 100-Volt Tweeter Network
The capacitor network supports phase integrity and dependable operation. - 50 Watts RMS / 100 Watts Peak
CTA-2031-compliant power handling supports everyday music listening. - 4-Ohm Impedance
Works with compatible factory and aftermarket audio systems. - 30% Mica-Filled Polypropylene Cone
Delivers clean, controlled midrange and midbass. - Half-Roll Nitrile Butyl Rubber Surround
Flexible suspension maintains mechanical durability during cone movement. - 1 in Copper Voice Coil And Kapton Former
Heat dissipation and thermal stability support reliable power handling. - Nickel-Plated Copper Terminals
Corrosion-resistant connections help maintain a durable electrical interface. - Verified With Klippel
Mechanical and acoustic testing checks performance consistency. - Vibration Resistant
Construction withstands vehicle-related shock and vibration. - Removable Motor Cover
The cover can be removed from the speaker motor assembly. - Speaker Pair With Installation Hardware
Two speakers come with a cutout template, screws and speed clips.
Footnotes:
Performance figures reflect manufacturer testing under specific conditions; results vary with the vehicle, system settings and use.
Grilles and trim rings are not included. Compatible grilles and speaker wire are sold separately.
Related Guides and Articles
Frequently Asked Questions
-
Power handling is rated at 50 watts RMS and 100 watts peak. The manufacturer identifies the power handling as CTA-2031 compliant.
-
Installation requires a 4.57 in (116.0 mm) cutout diameter, a 1.87 in (47.5 mm) mounting depth and 0.22 in (5.6 mm) of front-side clearance. Check these measurements against the intended mounting location before installation.
-
Mounting hardware is included: eight #8 Phillips self-tap screws measuring 0.75 in long and eight M4 speed clips. Grilles and trim rings are not included. Optional GF-525 flush-mount grilles and GS-525 surface-mount grilles are listed separately.
-
The tweeter crossover is integrated into the speaker assembly, so there is no separate external crossover enclosure to mount. This concealed design reduces installation clutter.
-
The frequency response is 75 Hz to 20 kHz. A mica-filled polypropylene cone handles midrange and midbass output, while a 3/4 in ferrofluid-cooled PET balanced-dome tweeter provides high-frequency detail.