Rockford Fosgate Punch 1000 Watt Mono Amplifier - P1000X1BD

Rockford Fosgate P1000X1BD Punch 1000 Watt Mono Amplifier

The Punch P1000X1bd mono amplifier pumps out 1,000 Watts into a 1-Ohm load. The Class-BD technology produces bass more efficiently over traditional amps, and its frequency response is optimized for subwoofers.

With its super efficient Class-BD circuit topology, the P1000X1bd assures maximum BOOM for your buck! Due to its dedicated low frequency response, this amplifier is optimized for mid-bass speakers or subwoofers only. No need to worry because its 1-ohm capability will drive a pair of 4-ohm DVC subwoofers or quad-configuration of 2-ohm DVC subwoofers with ease.

Key Features:

• High level input capable with Auto Turn-On circuit
• 12dB/octave Butterworth crossover
• RCA pass-thru outputs
• Features C.L.E.A.N. Set-up
• Optional remote Punch Level Control (PLC2) ready (w/ input clip indicator)
• On-board Punch EQ with +18dB boost @ 45Hz
• Muted turn on
• Stealth top mounted control panel
• Cast aluminum heatsink
• Over current protection
• Short circuit protection
• Infrasonic filter

Features:

• CE Compliant
  This product fulfills all essential safety and environmental requirements as defined in the European Directives (768/2008 EC).
• CTA-2006 Compliant
  Power ratings on Rockford Fosgate amplifiers conform to CTA-2006 industry standards. These guidelines mean your amplifier's output power ratings are REAL POWER numbers, not inflated marketing ratings.
• Class-BD
  Class-BD amplifiers have 75-80% efficiency ratings vs. 20-60% efficiency ratings of traditional Class-A/B amplifiers.
• Balanced Differential Inputs
  Differential inputs eliminate noise picked up by signal cables.
• DSM
  DSM utilize 1% tight-tolerances improving efficiency of the circuit, decreases cross-talk from other discrete components and lowers operating temperature.
• NOMAD
  NOMAD is a "real time" analog computer that protects your amplifier from shorting speaker wires and dangerously low speaker impedances.
• MEHSA³
  MEHSA³ reduces MOSFET temperatures, lowers distortion, increases durability and prolongs the output device life span.
• Engineered In The USA
  These Avatars are a personal signature from the Rockford Fosgate team member(s) who designed and engineered this fanatic product. This statement illustrates our commitment to being Designed and Engineered in the U.S.A.
• C.L.E.A.N. Set-Up
  C.L.E.A.N. (Calibrated Level Eliminates Audible Noise) is a patented circuit with in/out clip LEDs to help match a source to amp and optimize output.

Specifications:

• Number of Channels: 1
• Rated Power (RMS Continuous Power)
  • 300 Watts x 1 @ 4-Ohm
    
  • 500 Watts x 1 @ 2-Ohm
    
  • 1000 Watts x 1 @ 1-Ohm
• Total Power (Sum of Rated Power): 1000 Watts RMS
• Crossover Controls
  • Low-Pass (LP): 50-250Hz @ 12dB/octave Butterworth
    
  • Infrasonic Filter (IF): 28Hz @ 12dB/Octave Butterworth
• Tone Controls: Punch EQ2 Bass: 0dB to +18dB @ 45Hz
• Signal Input: Hi/Low level: 1 RCA pair
• Signal Output: Hi/Low level: 1 RCA pair
• Power Input Connector: Captive C-Clamp
• Power Wire Gauge: 4 AWG
• Speaker Output Connector: Captive C-Clamp
• Speaker Wire Gauge: 8 AWG to 18 AWG
  
• Heat Sink Type: Cast aluminum
• Cooling: Convection
• Remote Controls: Optional Punch Level Control (PLC2) Ready
• Visual Indicators
  • Power/Protect/Thermal LED
    
  • Input Clip LED
    
  • Output Clip LED
• Circuit Topology Class: Class-BD
• Frequency Response: 20Hz to 250Hz +/- 1.0dB