SurgeX FlatPak Surge Protector And Power Conditioner - SA-82

SurgeX FlatPak Surge Protector And Power Conditioner - SA-82

When space is at a premium, the SurgeX FlatPak is the perfect choice to safeguard projectors, flat panels, and digital displays from harmful electrical transients. It is easily hidden behind or beside equipment and designed to integrate with wall and ceiling mounting systems.

Featuring Series Mode technology, the FlatPak provides non-sacrificial protection against surges, spikes, and electrical noise that cause AV equipment malfunction and downtime. It does not shunt surge energy to the ground and will not produce ground contamination or common-mode disturbances that cause hissing sounds and pixelation on AV equipment.

Available in two configurations, the SA-82 model is engineered for non-networked devices and the SA-82-AR offers remote IP control capabilities for networked devices. This lets technicians control any connected device not currently IP addressable to manage outlets, including on/off, scheduling, AutoPing, and power cycling.

If you’re looking for a compact solution that offers advanced power protection and installs out of sight, then look no further than the SurgeX FlatPak.

Features

• Compact 3 lbs. design
  
• Series Mode® power protection technology
  
• Over Voltage Shutdown (with Auto Reset)
  
• Remote IP control capabilities (SA-82-AR)
  
• Non-sacrificial components
  
• Magnetic shielding steel enclosure
  
• Detachable 3' grounded 3-wire #18 line cord.

Specifications

• Load Rating: 8A
  
• Voltage Rating: 120V
  
• Power Requirement (no load): 8 W
  
• Surge Let-through Voltage (6000 Volt Surge): 0 Volts
  
• Maximum Applied Surge Voltage: 6000 Volts *
  
• Maximum Applied Surge Current: Unlimited (due to current limiting) *
  
• Maximum Applied Surge Energy: Unlimited (due to current limiting) *
  
• Endurance (C62.41-1991 category B3 pulses): 1 KV > 500,000; 3 KV > 10,000; 6 KV > 1000
  
• EMI/RFI Filter
  • Normal mode (50 ohm load): > 20dB 27kHz - 50MHz > 30dB 90kHz - 26MHz 30 dB @ 100 kHz; 56 dB @ 300 kHz; 64 dB @ 3 MHz; 24 dB @ 30 MHz
  • Common Mode ( 50 ohm load): > 10dB 360kHz - 50MHz > 20dB 2 MHz - 40MHz 9 dB @ 300 kHz; 16 dB @ 1 MHz; 28 dB @ 5 MHz; 35 dB @ 20 MHz
• Under-Voltage Auto Shutdown: No
  
• Over-Voltage Auto Shutdown: 145V
• Over-Current Auto Shutdown: Circuit Breaker
  
• Over-Temperature Auto Shutdown: None
  
• Measurement Accuracy
  • Voltage: NA
  • Current: NA
  • Power: NA
  • Energy: NA
  • Temperature: NA
• Network Port: No
  
• Serial Port: None
  
• Temperature Sensor Input: None
  
• Auxiliary Relay Outputs: No
  
• Contact Closure Input: No
  
• Temperature Range: 5C to 35C
  
• Humidity Range: 5% to 95% R.H. Non-condensing
  
• Agency Listings: Conforms to UL Stds 1283 & 1449 Certified to CSA Std C22.2 No. 8

Approximate Dimensions

• Height: 1.75"
• Width: 5.31"
• Depth: 9.06"

Approximate Weight

• Unit: 3.4 lbs
• Shipping: 5 lbs

* 1.2 x 50 microsecond industry standard combination wave surge as per IEEE C62.41
** Specifications subject to change without notice