Vent-A-Hood Designer Pyramid Wall Mount Hood with Magic Lung Blower 48-Inch Wide in Stainless Steel - JPH148/C1 SS

Vent-A-Hood JPH148/C1 SS Designer Pyramid Wall Mount Hood with Magic Lung Blower 48-Inch Wide in Stainless Steel

The Vent-A-Hood JPH148/C1 SS 48 in designer pyramid wall mount range hood pairs a stainless steel architectural silhouette with 300 CFM airflow, 450 Equivalent CFM performance and patented Magic Lung centrifugal ventilation. Its open canopy captures grease, smoke, heat and odors at the source while centrifugal force separates 99% of grease from the airflow without mesh or baffle filters. High-speed operation is rated at 5.4 sones, and the SensaSource heat sensor raises blower speed automatically as cooking temperatures increase.

Three 2700K LED lights offer dual-level dimming for prep or ambient illumination, while the removable E-Z Clean tray, snap-apart blower housing and blower wheels are dishwasher-safe for easier routine care.

Key Features

Magic Lung Centrifugal Ventilation

This Vent-A-Hood wall mount range hood uses a large open canopy to pull cooking vapors into a centrifugal system that spins grease out of the airstream rather than pushing air through restrictive mesh or baffle filters. The system separates 99% of grease while managing smoke, heat and odors, helping maintain strong ventilation without conventional filter resistance.

300 CFM / 450 Equivalent CFM

The B100 single blower delivers 300 CFM and is rated at 450 Equivalent CFM for comparison with conventional filter-based products. Vent-A-Hood identifies this capacity for wall hoods above standard electric and 4-burner gas or equivalent cooking equipment. For range hood sizing and airflow, select a hood at least as wide as the cooktop; adding 3 in to 6 in of width can improve capture performance.

Quiet 5.4-Sone High-Speed Operation

At its highest setting, the hood is rated at 5.4 sones, or approximately 55.4 dB. Because the Magic Lung design does not force air through conventional filters, it can move cooking vapors with less restriction and significantly less noise than conventional filter-based systems.

Filter-Free E-Z Clean Maintenance

There are no mesh or baffle filters to scrub or replace. The grease collection tray, blower housing and blower wheels can be removed, with snap-apart construction and dishwasher-safe components that make grease cleanup more manageable.

Grease Control Before the Ductwork

Centrifugal separation removes grease from the airflow before it reaches the duct path. Limiting accumulation inside the ductwork can help reduce buildup and the potential for flame spread.

SensaSource Heat Sensor

When temperatures rise during cooking, SensaSource automatically increases blower speed to maintain ventilation performance. The response happens without requiring a manual adjustment while heat output changes.

Three Dimmable 2700K LED Lights

Three warm white LEDs illuminate the cooking surface, and dual-level dimming lets you choose brighter task lighting for meal preparation or softer light for everyday ambiance.

Stainless Steel Pyramid Design

The crisp pyramid silhouette turns the 48 in hood into a timeless architectural statement, while the stainless steel finish emphasizes its clean lines. This model is also suitable for covered outdoor applications when installed on a GFCI-protected branch circuit.

Features

• 48 in Designer Pyramid Profile
  The Vent-A-Hood JPH148/C1 SS brings a crisp stainless steel architectural silhouette to wall-mounted kitchen ventilation.
• 300 CFM / 450 Equivalent CFM
  The B100 single blower is suitable for standard electric and 4-burner gas or equivalent cooking equipment.
• Magic Lung Centrifugal Filtration
  Open-canopy capture manages grease, smoke, heat and odors without conventional mesh or baffle filters.
• 99% Grease Separation
  Centrifugal force removes 99% of grease from the airflow before it enters the duct path.
• 5.4 Sones / 55.4 dB
  High-speed operation provides powerful ventilation with a measured sound rating.
• Filter-Free E-Z Clean Parts
  The grease tray, snap-apart blower housing and blower wheels remove for dishwasher-safe cleaning.
• Enhanced Fire Safety
  Separating grease before the ductwork helps limit buildup and the potential for flame spread.
• SensaSource Heat Sensor
  Blower speed increases automatically when cooking temperatures rise.
• Three Dimmable 2700K LEDs
  Dual-level warm white lighting supports cooking tasks and softer everyday illumination.
• Covered Outdoor Installation
  The hood can be used in covered outdoor applications with a GFCI-protected branch circuit.
• Matching Duct Covers Sold Separately
  Optional matching covers conceal ductwork above the wall-mounted hood.

Footnotes:

For cleaning, turn the blower off before removing blower shields or blower housings.

Installation requires smooth-wall ducting of adequate area and outdoor venting. Do not use corrugated or flex duct, which restricts airflow.

Covered outdoor installation requires a GFCI-protected branch circuit.