Martin Logan Neolith - The Pinnacle Of Electrostatic Speakers

In this video, we speak with Dennis Chern, brand ambassador for Martin Logan, about the largest and, arguably, best-sounding pair of speakers we've ever carried at Abt, the Neolith. These speakers both look and sound fantastic and are made from only premium parts. If you live in the Chicagoland area, make sure to stop by Abt for a demo of what might be the best speakers you'll ever hear.

Key Features:
System Frequency Response: 23-22,000 Hz ± 3db
Recommended Amplifier Power: 50-1,300 watts per channel at 4 Ohms
Dispersion
Horizontal: 30 Degrees
Vertical: 48" (122 cm) line source
Sensitivity: 90 dB/2.83 volts/meter
Impedance: Nominal: 4 ohms, 0.43 ohms @ 20 kHz
Crossover Frequency: 60, 250-400 Hz
High/Mid Frequency Driver: 48" x 22" (122 x 56 cm) CLS XStat electrostatic (1,056 in2/6,813 cm2)
Woofers
15" (38.1cm) cast basket, high excursion, rigid aluminum cone with extended throw drive assembly. Extensively vented triple shorting ring motor and 4-layer coil to eliminate compression and distortion
12" (30.5cm) round cast aluminum alloy frame, high excursion, rigid carbon fiber sandwich cone with long throw design, 3-inch (7.5cm) diameter copper-clad aluminum flat wire voice coil, and vented pole piece and under-spider opening to reduce power compression
Enclosure: Phenolic Resin Polymer: Dense substrate with superb mechanical strength minimizes cabinet vibrations caused by woofer cone motion counter forces to provide an ideal baffle for the electrostatic panel and woofers
Components
High-Pass Crossover: 1% resistors mounted to heat sinks, polypropylene capacitors, air core inductors, dual toroidal audio transformers to drive electrostatic element
Low-Pass Crossover: 1% resistors mounted to heat sinks, toroidal inductors, supports user options to modify sound output via jumpers
Bass Control: 0dB, -4dB, -8dB
Distance Control: 3 meters (or less), 4 meters, 5 meters (or greater)
Light Control: On, Dim, Off
Signal Inputs: WBT-0705Ag nextgen™ 5-way bi-wire binding posts feature a filigree signal conductor made from fine silver for high conductivity. Fully insulated for CE and IEC conformity providing shock hazard protection. Free from eddy current effects. Max constant current 30 A, admissible peak current 200 A. Outer metal cap with palladium plated finish
Mains Power Draw
Standby: 1W each
Max: 10W each

Approximate Dimensions:
Height: 74.8"
Width: 30.3"
Depth: 34.2"