If you're just starting to set up your AirCare MA0800 Mini-Console humidifier, there are a few things you need to know as you begin getting ready. Start by taking all of the parts of the AirCare Mini-Console humidifier out of the box, alongside the manual. Then, make sure that the filter and wick are securely placed in the proper notches: that way, you can ensure that the humidity output is completely clean. Once you've checked that every wick and filter is in place and correctly notched, place the top of your appliance back on. The next step is to pick up and fill the water tank. To fill, press the knob and spin it clockwise—this will lock it in an open position. Fill it with water, then press the knob and turn it counterclockwise to close. Then place it on the humidifier: the entire capacity will drain into the base, allowing you to fill the tank once more for maximum water storage. Then use the power button and display to choose your settings. Adjust the fan speed (top button) and the humidity level (middle button) to reach your desired climate. F3 is high, F2 is medium, F1 is low, and A is Auto. F means refill humidifier, CF means check filter/wick, CL means control lock.
