Alpine 1100W 5-Channel Marine Amplifier - M-A110V

Alpine M-A110V 1100W 5-Channel Marine Amplifier

Built for a Complete Marine Audio System
The Alpine M-A110V 5-channel marine amplifier is designed to power an entire boat audio setup from one streamlined source. It can drive four Alpine Marine speakers plus a subwoofer, helping you build a balanced sound system with less clutter and more control. Pair it with 6.5-inch, 7.7-inch, or 8.8-inch coaxial speakers, or choose 8.8-inch preloaded speaker cans to match your boat’s layout. Add an Alpine 10-inch or 12-inch Marine subwoofer to bring more depth, impact, and full-range sound to every seat on board.

Flexible Tuning for Better Sound on the Water
Every boat has a different layout, so the M-A110V includes the controls needed to shape the system correctly. Independent gain controls with clip indicators help with precise setup, while selectable high-pass and low-pass filters for Channels 1–4 support the connected speakers. For bass, dedicated subwoofer controls include a low-pass filter, subsonic filter, and adjustable parametric EQ. These features make it easier to protect your speakers, fine-tune low-end response, and achieve clean Alpine sound from bow to stern.

Built for Marine Conditions and Clean Installation
Marine amplifiers need to perform in demanding conditions, and the Alpine M-A110V is built with that in mind. Its large finned heat-sink design and advanced thermal protection circuit help manage heat as the system works hard throughout the day. For installation, the amplifier keeps signal, power, and speaker terminals on one side, while tuning controls sit beneath a removable top cover for easier access. Detachable, ABYC-compliant terminals, included 4 AWG reducers, high-level input capability, mounting spacers, stainless hardware, terminal boots, and required tools all support a professional-looking marine install.

Key Features

• 5-channel marine amplifier
• 1,100W of combined rated system power
• 125W RMS x 4 full-range channels
• Up to 600W RMS x 1 subwoofer channel
• Best-in-class thermal handling
• Designed for extended all-day playback
• Automatic Two-stage thermal protect circuit
• IPX6-rated waterproof chassis
• Salt, fog, and UV resistant
• Watertight top-panel control cover
• Included terminal boots protect power and speaker connections
• One-side terminal and connection layout
• Detachable ABYC-compliant terminals
• High- and low-level input compatibility
• Advanced speaker and subwoofer tuning controls
• Compatible with RUX-M-UNIV Bass Knob

Features

• One Amplifier. A Complete System.
  A complete marine sound system should not require a stack of amplifiers. The M-A110V delivers 125 watts RMS to each of four full-range channels and up to 600 watts RMS to the subwoofer channel, giving speakers the power to stay clear and energetic while adding deep, controlled bass. With 1,100 watts of combined rated output available from one chassis, it simplifies system design while delivering the impact needed to overcome wind, waves, and engine noise. Music stays full and balanced from the helm to the stern.
• Protected for Life on the Water
  The M-A110V is designed for the conditions that come with life on the water. Its IPX6-rated waterproof chassis helps protect against powerful water spray, while salt, fog, and UV resistance support long-term durability in demanding marine environments. A watertight top-panel cover shields the tuning controls, and included terminal boots and a remote-port cover provide added protection at key connection points. Together, these details help keep the amplifier protected through changing weather and repeated days on the boat.
• Complete Your Alpine Marine System
  The M-A110V gives you a streamlined way to power four Alpine Marine speakers and a subwoofer from a single amplifier. Choose from 6.5-inch, 7.7-inch, or 8.8-inch coaxial speakers, or add 8.8-inch preloaded speaker cans to fit the layout of your boat. Then bring more depth and impact to the system with an Alpine 10-inch or 12-inch Marine subwoofer. With dedicated power and tuning for both the speakers and bass, every component works together for balanced Alpine sound from bow to stern.
• Tune the System to Your Boat
  Every marine system has different speakers, subwoofers, and installation goals. The M- A110V provides independent gain controls with clip indicators, selectable high-pass and low-pass filters for Channels 1-4, and dedicated subwoofer controls including a low- pass filter, subsonic filter, and adjustable parametric EQ. These tools help an installer protect connected speakers, shape bass response, and balance the system for the boat. Add the optional RUX-M-UNIV Bass Knob to adjust subwoofer level from the listening position.
• Built to Keep the Music Playing
  Long days on the water can place heavy demands on an amplifier, especially when the music stays turned up. The M-A110V combines a large finned heat-sink design with best-in-class thermal handling and an advanced thermal protection circuit. As temperatures rise, the amplifier can automatically manage its output to help reduce heat and keep the music playing instead of immediately shutting down. Once operating temperatures return to normal, full output is automatically restored for dependable performance from launch to sunset.
• Designed for a Cleaner Installation
  Thoughtful connections make a powerful amplifier easier to install and service. All signal, power, and speaker terminals are arranged along one side, while the tuning controls sit beneath a removable top cover for convenient access. Detachable, ABYC-compliant terminals simplify wiring, included 4 AWG reducers support common cable sizes, and high-level input capability helps integrate with factory or aftermarket sources. Mounting spacers, stainless hardware, terminal boots, and the required tools are also included for a clean, professional installation.