JL Audio TwK 88 System Tuning 8 Ch. Digital Signal Processor - 010-03166-00

JL Audio TwK 88 System Tuning 8 Ch. Digital Signal Processor - 98101

The TwK™ 88 is a state-of-the-art digital signal processor engineered to deliver world-class system tuning capabilities, in an easy-to-use format. Equipped with an advanced 24-bit DSP processor, the TwK™ 88 includes flexible input/output options, 80 total bands of equalization and powerful mixing tools. The included DRC-200 Digital Remote Controller lets you add dual configurable level controls, preset toggle, plus LED status reporting, all from the driver's seat.

Feature:

• Flexible input design:
  
  • 8 Differential-balanced, line-level input jacks (RCA) accept most line-level signals up to 7.1V (RMS)
  • Separate optical (Toslink) and coaxial digital inputs connect to any digital (S/PDIF) output.
• Flexible setup features:
  
  • Individual level trim, linkable for tuning
    
  • Individual polarity controls, linkable for tuning
    
  • Powerful input mixing tools
• 8 Powerful 10-band equalizers with flexible assignment capabilities:
  
  • 10-band graphic full octave EQ
    
  • 10-band parametric EQ
• Configurable EQ assignment delivers simple to complex tuning options:
  
  • Individual EQs may be assigned to each output
    
  • Multiple outputs may be combined and assigned to a single EQ
• 8 analog, line-level RCA output jacks (4V RMS), each with a full-featured tuning set:
  
  • Fully variable, high-pass and low-pass filters with selectable slopes from 6 dB/octave to 48 dB/octave (in 6 dB/octave increments)
    
  • Configurable delay settings, with separate entries for speaker distance plus offset control; expressed in time or distance units and fully linkable with other channels
  • Polarity control, fully linkable with other channels
    
  • Comprehensive level controls, fully linkable with other channels
  • Optical (Toslink) jack provides a pass-through digital audio (S/PDIF) output from assignable input channels, with no signal processing applied.
• Provides a dedicated remote turn-on voltage output for activating aftermarket audio equipment.
• JLid™ Port allows connection of the included DRC-200 Digital Remote Controller to add dual configurable level controls, plus LED status reporting from the driver's seat.

Specifications:

• Power Supply Type: Regulated DC-DC SMPS
• Input Operating Voltage: 10 - 16 VDC
• Standby Current Draw: <1.5 mA
• Operating Current Draw: 0.7 A
• Recommended Fuse value: 1A
• Input Channels: 8
• Input Type: Line-Level, Differential-Balance
• Input Voltage Range: 250 mV - 7.1 V RMS
• Minimum Input Voltage: 10 mV RMS
• Input Level Setting: Eleven discrete selections from 250 mV - 7.1V RMS
• Output Channels: 8
• Analog Output: Unbalanced, stereo RCA jacks
• Digital Output: Optical (Toslink) output (S/PDIF)
• Output Impedance: 450 Ohms
• S/N Ratio: 96 dB (A-Weighted, referred to 4V RMS Output)
• THD+N @ Rated Output: 0.02% (20 Hz - 20 kHz)

Signal Processing

• Audio Resolution: 24 bit / 48 kHz
• Number EQ Bands: 10 x 8 Channels
• Remote Level Control: Included (DRC-200)
• Remote Level Functions:Master Volume Control + Trim; Master Volume Control + Fader; Zone Control, LED Status Reporting

Approximate Dimensions:

• Width: 4.29"
• Height: 1.85"
• Depth: 6.14"

Approximate Weight:

• Unit: 2.58 lbs
• Shipping: 5.5 lbs
  

Warranty Information:

• Manufacturer Warranty (authorized online retailer): 2-Year Parts and Labor Warranty