Polk Audio Monitor XT12 12-Inch Powered Subwoofer in Black - 300414-01-00-101
- 12-Inch Bi-Laminate Paper Woofer
- 24Hz Low-Frequency Extension
- Low-Level RCA And LFE Inputs
- Bass-Reflex Ported Enclosure
- Critically Braced MDF Cabinet
- 80-160Hz Adjustable Low-Pass Crossover
- 0/180 Degrees Phase Adjustment
- Nickel-Plated Five-Way Binding Post Inputs
- Black Finish
Polk Audio 300414-01-00-101 Monitor XT12 12-Inch Powered Subwoofer in Black
The Polk Audio 300414-01-00-101 Monitor XT12 12 in powered subwoofer from the Monitor XT Series combines bass extension to 24 Hz with a built-in Class AB amplifier rated at 50 W RMS continuous power and 100 W peak. Its Dynamic Balance woofer and ported cabinet add punch and impact to movie soundtracks, music and games, while a braced MDF enclosure helps limit unwanted resonance. Line-level, single-RCA LFE and speaker-level inputs offer connection options for home theater and music systems, with adjustable crossover, phase and volume controls to blend the bass with your speakers.
Key Features
Dynamic Balance Bass Down to 24 Hz
A 12 in bi-laminate paper cone with a foam surround handles the low-frequency foundation of movie soundtracks, music and games. The Dynamic Balance woofer works with the bass-reflex cabinet to deliver a 24-160 Hz frequency response. Class AB amplification is built into the enclosure, pairing the driver and its amplifier in one powered component.
Braced MDF Cabinet and Precision-Fit Grille
Strong bass takes more than a capable woofer and amplifier. Critically braced MDF construction and a closely fitting removable grille help minimize unwanted resonance and sonic interference, keeping attention on the woofer's output. A black vinyl finish completes the enclosure, with permanently installed feet supporting the cabinet.
LFE, Line-Level and Speaker-Level Inputs
For a receiver with an LFE output, the single-RCA LFE input provides a dedicated connection option. Line-level connectivity and left/right nickel-plated 5-way binding posts give you additional ways to connect the subwoofer to a home theater or music system.
80-160 Hz Crossover and Adjustable Phase
Use the variable low-pass crossover to adjust the upper end of the subwoofer's range from 80 to 160 Hz, then set volume to balance bass against the rest of your speakers. A 0/180 phase adjustment provides a polarity choice for blending the subwoofer with the system, and an LFE crossover setting is also available.
Expand to a Two-Subwoofer System
For a home theater build that calls for more bass, the design also supports using an additional subwoofer. Adding a second unit can increase output and make low-frequency coverage more even across the room.
Coordinated Monitor XT Series Sound
Timbre-consistent components across the Monitor XT family let you mix and match speakers for a personalized home theater or music installation. The coordinated design supports a unified sound field and smooth speaker-to-speaker blending as you build out the system.
Features
- 12 in Dynamic Balance Driver
A bi-laminate paper cone with foam surround brings added impact to your entertainment. - 24-160 Hz Frequency Response
Reproduces the low-frequency content in your music, movies and games. - 50 W RMS Continuous / 100 W Peak
Powers bass playback with an internal Class AB amplifier. - Bass-Reflex Ported Enclosure
Supports the woofer's deep-bass reproduction. - Braced MDF Cabinet
Helps control unwanted cabinet vibration. - Removable Precision-Fit Grille
Helps limit interference around the woofer's output. - Black Vinyl Finish
Pairs a black vinyl exterior with permanently installed cabinet feet. - LFE, Line-Level and 5-Way Binding-Post Inputs
Choose a connection that matches your receiver's supported outputs. - 80-160 Hz Low-Pass Crossover / LFE
Sets the upper-frequency limit for bass playback. - 0/180 Phase and Volume Controls
Fine-tune polarity and bass level alongside your other speakers. - Two-Subwoofer System Option
An additional unit offers a path to more bass and smoother room coverage. - Monitor XT Series Matching
Build a coordinated speaker system with timbre-consistent components.
Footnotes:
Performance figures are based on manufacturer testing under specific conditions and may vary with your home, settings and use.
Related Guides and Articles
Frequently Asked Questions
-
Connection options include line-level inputs, a single RCA LFE input, and left/right 5-way binding-post inputs. These provide multiple ways to connect to a receiver or home audio system.
-
The built-in Class AB amplifier delivers 50 W RMS continuous power and 100 W peak power.
-
The published frequency response is 24 Hz to 160 Hz. The ported bass-reflex cabinet supports deep bass for movie soundtracks, music, and games.
-
The cabinet measures 16 in wide x 16.4 in high x 17.9 in deep and weighs 39 lb. The feet are permanently installed.
-
Yes. Adjustable volume, an 80 Hz to 160 Hz low-pass crossover with an LFE setting, and 0/180 degrees phase adjustment let you blend the bass with the rest of your sound system.