Polk Audio Monitor XT15 High-Resolution Compact Bookshelf Speakers in Black (Pair) - 300147-01-00-005
- Sold As Pair
- 30–150W Recommended Amplifier Power Per Channel
- 5.25" Dynamic Balance Woofers
- 1" Terylene Dome Tweeters
- Hi-Res Audio Certified
- Dolby Atmos And DTS:X Compatible
- 48Hz - 40,000Hz Frequency Response
- 5-Way Nickel-Plated Binding Posts
- Critically Braced MDF Cabinets
- Black Finish
Polk Audio 300147-01-00-005 Monitor XT15 High-Resolution Compact Bookshelf Speakers in Black (Pair)
The Polk Audio 300147-01-00-005 Monitor XT15 compact bookshelf speaker pair combines Hi-Res Audio certification, 1 in Terylene dome tweeters and 5.25 in Dynamic Balance woofers for music, movies, TV and gaming. Sold as two speakers in Matte Black, the pair can handle front left/right or side/rear surround duties. Each speaker requires external amplification, with recommended power of 30-150W per channel and compatibility with 4- and 8-ohm amplifier outputs. Detailed high-frequency reproduction, responsive bass and clear midrange bring voices, instruments and soundtracks into focus without a large cabinet.
Key Features
Hi-Res Audio Certified Performance
Hear the finer details in high-resolution recordings, movies and games. The Terylene dome tweeters extend to 40 kHz, supporting upper-frequency clarity and the sense of air and space that helps recordings sound open rather than confined to the cabinets.
Dynamic Balance Bass and Clear Midrange
High-efficiency, bi-laminate paper woofers balance responsive low frequencies with low-distortion midrange reproduction. That combination helps voices and instruments remain easy to follow while adding punch to music and movie soundtracks. Overall frequency response spans 48 Hz-40 kHz, with separately specified -3 dB limits of 73 Hz-26 kHz, distinguishing overall extension from the tighter response range.
Dolby Atmos Certified and DTS:X Compatible
Use the speakers with a Dolby Atmos- or DTS:X-enabled AV receiver to build out your home theater. Surround processing comes from the connected equipment, not from built-in decoding in the speakers. For amplifier matching, check the recommended 30-150W per channel and compatibility with 4- and 8-ohm amplifier outputs rather than assuming a universal system match.
Built for Pure Listening
Critically braced MDF helps keep cabinet resonances from coloring the drivers' output, letting the recording take the lead. Nickel-plated 5-way binding posts provide the wired connection to an amplifier or receiver, bringing the same attention to the connection as to the enclosure.
Two-Channel Stereo or Surround Placement
Start a two-channel stereo system with the two supplied speakers, or use them as side/rear surrounds in an existing theater. The stand-mount bookshelf format and supplied feet support shelf or stand placement. Rear-ported enclosures have a Matte Black finish and are not wall-mountable, so plan for supported shelf or stand positioning rather than a wall installation.
Features
- Hi-Res Audio Certified 1 in Terylene Tweeters
Ceramic motor structures help control resonance for detailed treble. - 5.25 in Dynamic Balance Woofers
Bi-laminate paper cones deliver vocal definition and soundtrack impact. - 48 Hz-40 kHz Overall Frequency Response
The -3 dB response is specified separately at 73 Hz-26 kHz. - Dolby Atmos Certified and DTS:X Compatible
Supports theater playback with an appropriately equipped AV receiver. - 30-150W Recommended Power Per Channel
Pair with external amplification compatible with the stated 4- and 8-ohm outputs. - 86 dB SPL Sensitivity
Specified at 2.83 V/1 m for a defined amplifier-comparison reference. - Braced MDF Cabinets
Internal reinforcement limits unwanted enclosure coloration. - 5-Way Nickel-Plated Binding Posts
Provide speaker connections to your amplifier or receiver. - Removable Precision-Fit Grilles
Designed to minimize grille interference with reproduced sound. - Two Speakers Included
Assign the pair to front left/right or side/rear surround channels. - Matte Black Stand-Mount Design
Rear-ported enclosures include feet for placement and are not wall-mountable. - Designed and Engineered in Baltimore, Maryland
Reflects Polk Audio's documented design and engineering location.
Footnotes:
Measured performance figures reflect manufacturer testing under specific conditions and vary with the home, settings and use.
Related Guides and Articles
Frequently Asked Questions
-
Recommended amplifier power is 30 to 150 watts per channel. Use an external amplifier or AV receiver with compatible 4- or 8-ohm outputs.
-
Yes. They can serve as front left/right speakers or as side/rear surround speakers. Dolby Atmos certification and DTS:X compatibility support use with appropriately equipped AV receivers; the speakers do not provide built-in surround processing.
-
Each speaker measures 6.5 in wide x 10.6 in high x 7.18 in deep and weighs 9 lb. The standmount bookshelf design includes supplied feet and is not wall-mountable. The enclosure is rear-ported.
-
Overall frequency response is 48 Hz to 40 kHz, with -3 dB limits of 73 Hz to 26 kHz. A 1 in Terylene dome tweeter and 5.25 in bi-laminate paper woofer handle high and low frequencies. The speakers are Hi-Res Audio certified.
-
A limited five-year warranty is included.