REL Acoustics Serie S 10-Inch Powered Subwoofer in Gloss White Lacquer (Each) - S/550 WHITE
- 10-Inch Front-Firing CarbonAlloy Woofer
- 20Hz - 120Hz Variable Crossover
- 550W RMS Class D Amplifier
- 19Hz (-6dB) In-Room Low-Frequency Extension
- High-Level, RCA And XLR Inputs
- 12-Inch Down-Firing Passive Radiator
- Second-Generation PerfectFilter
- Simultaneous High Level And .1/LFE
- AirShip Direct Compatible (Sold Separately)
- Gloss White Lacquer Finish
REL Acoustics S/550 WHITE Serie S 10-Inch Powered Subwoofer in Gloss White Lacquer (Each)
The REL Acoustics S/550 WHITE Serie S powered subwoofer combines built-in 550 watts RMS Pure Class D amplification, a 10 in front-firing CarbonAlloy driver and a 12 in down-firing passive radiator. Its in-room low-frequency extension reaches 19 Hz at -6 dB, with simultaneous High Level and .1/LFE operation for stereo listening and movie soundtracks. Intended for medium-sized rooms, this single-subwoofer configuration pairs analog filtering and second-generation PerfectFilter with an eight-coat Gloss White Lacquer finish and an included cloth grille, bringing Serie S bass performance to a shared music-and-theater system.
Key Features
Built-In Power for Medium-Room Systems
For a two-channel listening setup or a room that also serves as a home theater, amplification is already inside the cabinet rather than requiring a separate subwoofer power amplifier. The intended room range of 250-500 sq. ft. gives you a starting point for matching the subwoofer to your listening space, without promising the same output in every room.
CarbonAlloy Driver and Carbon/Carbon Passive Radiator
A long-throw active driver combines a die-cast alloy chassis, pure carbon-fiber cap and redesigned suspension. Reduced moving mass supports the attack and decay of bass notes, while the down-firing Carbon/Carbon flat-cone passive radiator uses a revised low-mass piston to support excursion, depth and dynamic output. The two-driver arrangement is designed for both musical integration and movie playback.
Analog Filtering and a 20-120 Hz Crossover
Second-generation PerfectFilter works alongside analog filters and polypropylene input-filter capacitors derived from Reference models to help match the bass with the main loudspeakers. The variable 20-120 Hz crossover lets you adjust the handoff to your speakers rather than relying on a single fixed crossover setting.
High Level and .1/LFE for Music and Movies
The High Level connection takes its signal from your amplifier's speaker outputs; it does not supply power to the main speakers. Keeping that connection active alongside a separate .1/LFE feed lets one subwoofer serve stereo listening and movie effects in the same system. High Level Neutrik Speakon, stereo low-level RCA and dedicated LFE RCA and XLR inputs provide the documented connection choices, and a nominal 10-meter Neutrik Speakon cable is supplied.
From One Subwoofer to Stereo Pairs and Line Arrays
Start with the supplied single unit, add another for a stereo pair, or build toward stacked arrays of as many as three per channel. Line Array mounting hardware is included, while the additional subwoofers are separate purchases. An integrated knurled-aluminum front-rail adjustment knob helps establish a stable bottom unit on soft or uneven floors, including thick carpeting.
Optional AirShip Direct Wireless
The separately purchased AirShip Direct system carries High Level and .1/LFE signals together, so a combined music-and-movie setup can avoid long visible signal-cable runs. Wireless capability depends on this optional accessory; a mains power connection is still required, and a power cord is included.
Eight-Coat Gloss White Lacquer
Horizontal side-wall strakes, elliptical handle recesses and restrained silver accents give the cabinet its distinctive appearance, while internal bracing supports cabinet control. The standard cloth grille is included with this White configuration. A Premium Wood Grille offers an alternative decorative treatment.1
Features
- 550 Watts RMS Linear Class D
Built-in amplification powers the subwoofer, with 13-watt idle consumption. - 10 in CarbonAlloy Active Driver
A carbon-fiber cap and revised suspension support responsive bass attack and decay. - 12 in Carbon/Carbon Passive Radiator
The down-firing design supports in-room low-frequency extension to 19 Hz at -6 dB. - Second-Generation PerfectFilter
Analog filtering and Reference-derived polypropylene capacitors help blend bass with your main speakers. - Simultaneous High Level and .1/LFE
Maintain separate music-integration and movie-effects feeds in one system. - Speakon, RCA and XLR Inputs
Connect through High Level Neutrik Speakon, two low-level RCA inputs, one LFE RCA input or one LFE XLR input. - 20-120 Hz Variable Crossover
Adjust where the subwoofer's bass meets your main speakers. - Stereo Pair and Line Array Expansion
Plan a stereo pair or stacks of up to three units per channel; mounting hardware is supplied, but additional subwoofers are not included. - Front-Rail Leveling Adjustment
Help stabilize the bottom unit on uneven floors or thick carpet. - AirShip Direct Compatible
Add separately sold wireless hardware to transmit High Level and .1/LFE together. - Eight-Coat Gloss White Lacquer
A layered lacquer finish complements an internally braced cabinet with silver accents. - Cloth Grille Included
Use the supplied cloth grille or choose the optional Premium Wood Grille.1 - Electronic Protection Systems
Fully Electronic Set Safe, D.C. fault and output-short protection are built in.
Footnotes:
1 Premium Wood Grille is not included and may be purchased separately.
Related Guides and Articles
Frequently Asked Questions
-
Yes. High Level and .1/LFE inputs can operate simultaneously, allowing separate integration with your music system and movie-effects feed. The High Level connection takes its signal from your amplifier's speaker outputs rather than supplying speaker power.
-
Wireless connectivity requires the optional AirShip Direct system, sold separately. It carries High Level and .1/LFE signals together, supporting a combined music and home theater setup without long visible signal-cable runs.
-
The manufacturer's recommended medium-room range is 250-500 sq. ft. It is intended for music systems and home theaters; this room-size guidance is not a guarantee of output in every room.
-
The cabinet measures 17.5 in wide x 14.75 in high x 19.75 in deep, including feet and rear-panel controls. Allow an additional 1.75 in of depth when using the High Level connector. Net weight is 68 lbs.
-
Published low-frequency extension is -6 dB at 19 Hz. A 550-watt RMS amplifier powers the front-firing active driver, while a 12 in down-firing passive radiator supports bass extension. The variable crossover adjusts from 20-120 Hz.