Main Content
Zoeller 1/2 HP Submersible Sump Pump - 98-0001
Ask Bolt?
Shop Zoeller
Abt Model: M98
UPC: 053514029463
Ship to
Your Price:
$335
Regular Price:
Comp. Value: $466
Special financing as low as $56/mo
$56/mo
suggested payments with 6 month special financing.
Get a decision in seconds with no impact to your credit bureau score.
or
Free Shipping
Order within 4 hrs 15 mins
to
Ask Bolt?
Zoeller 1/2 HP Submersible Sump Pump, Model M98
Features
- Corrosion-resistant, powder coated epoxy finish
- Durable cast iron construction
- Cast iron switch case, motor, pump housing and base
- No sheet metal parts to rust or corrode
- All castings are cast iron class 25-30 25000# tensile strength
- Stainless steel screws, guard, handle, arm and seal assembly
- Float-operated, submersible (NEMA 6), 2 pole mechanical switch
- Permanent split capacitor motor, oil filled and hermetically sealed, automatic reset thermal overload protection
- Bearings – upper & lower oil fed cast iron
- Carbon and ceramic shaft seal
- Entire unit pressure-tested after assembly
- Watertight neoprene square ring between motor and pump housing
- Maximum temperature for effluent or dewatering: 130°F (54°C)
- Passes ½" (13 mm) spherical solids
- No screens to clog
- 1 ½" NPT discharge
- On point: 9 ½" (24 cm)
- Off point: 3" (8 cm)
- Major width: 10-1/8" (25.7 cm)
- Major height: 12" (30 cm)
- Simplex and duplex systems available
- Packaged systems available
- Automatic and nonautomatic available
- Available with piggyback variable level float switch
Specifications:
- Hertz 60Hz
- Horse Power 1/2 HP
- Voltage 115 or 230 V
- Phase 1 Ph
- RPM 1725 RPM
- Type Permanent split capacitor
- Insulation Class B
- Amps 4.7 - 9.4 Amps
- Operation Automatic or nonautomatic
- Auto On/Off Points 9-1/2" / 3" (24 cm / 8 cm)
- Discharge Size 1-1/2" NPT
- Solids Handling 1/2" (13 mm) spherical solids
- Cord Length 15' (5 m) standard
- Cord Type UL listed
- Max Head 23' (7 m)
- Max Flow Rate 73 GPM (273 LPM)
- Max Operating Temp 130° F (54° C)
- Cooling Oil filled
- Motor Protection Auto reset thermal overload
- Cap Cast iron
- Motor Housing Cast iron
- Pump Housing Cast iron
- Base Cast iron
- Upper Bearing Oil-fed cast iron
- Lower Bearing Oil-fed cast iron
- Mechanical Seals Carbon and ceramic
- Impeller Type Non-clogging vortex
- Impeller Engineered plastic
- Hardware Stainless Steel
- Motor Shaft AISI 1215 cold roll steel
- Gasket Neoprene
Approximate Dimensions
- Height: 12.063"
- Width: 10.125"
Approximate Weight
- Shipping: 33 lbs
Warranty Information:
- Manufacturer Warranty (authorized online retailer): Three Years Parts
Features and specifications are subject to change without notice
California customers:
General
Color
Green
Type
Submersible Sump Pump
Horsepower (hp)
0.5
Discharge Flow @ 10 Ft. (Gallons Per Hour)
3660
Housing Material
Cast Iron
Switch Type
Vertical Float
Approximate Weight
Package Weight (lbs)
32
Approximate Dimensions
Package Size HxWxL (in)
13 x 7 x 11
Guides
Installation Guide
Frequently Asked Questions
-
The motor has a horsepower of 0.5, providing reliable power for efficient water removal.
-
It uses a permanent split capacitor motor that is oil filled and hermetically sealed, ensuring durability and quiet operation.
-
The sump pump features a cast iron housing with a corrosion-resistant powder-coated finish for long-term durability and protection.
-
It discharges water at a rate of 3,660 gallons per hour at a 10-foot lift, making it effective for typical sump applications.
-
The pump is equipped with a vertical float switch that automatically turns the pump on and off based on water level.
Key Features
- Corrosion-Resistant, Powder Coated Finish
- Cast Iron Construction
- Float-Operated
- Permanent Split Capacitor Motor, Oil Filled And Hermetically Sealed
- Carbon And Ceramic Shaft Seal
- 1/2 Horsepower
- 1725 RPM
- 115 Or 230V
- 4.7-9.4 Amps
- Green Finish
Guides
